Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "PTZScan"
| Line 2: | Line 2: | ||
===Description=== | ===Description=== | ||
The Scan feature allows you to set a predetermined path from Point A to Point B | The Scan feature allows you to set a predetermined path from Point A to Point B | ||
| − | === | + | ===Pre-Requisites=== |
| + | (Placeholder) | ||
| + | ===Video Instructions=== | ||
<embedvideo service="youtube">https://youtu.be/5hhq5OzKi3I</embedvideo> | <embedvideo service="youtube">https://youtu.be/5hhq5OzKi3I</embedvideo> | ||
| − | ===Instructions=== | + | ===Step by Step Instructions=== |
1. Login to your IP Camera via Internet Explorer. | 1. Login to your IP Camera via Internet Explorer. | ||
Revision as of 16:28, 18 July 2016
Contents
How to Setup Scan
Description
The Scan feature allows you to set a predetermined path from Point A to Point B
Pre-Requisites
(Placeholder)
Video Instructions
Step by Step Instructions
1. Login to your IP Camera via Internet Explorer.
2. On the right hand side click, "PTZ Settings" and make sure, "Scan" is selected in the dropdown menu.
3. Using the PTZ Controls, move the camera into the starting position, and click, "Set Left"
4. Move the camera to the second position, and click, "Set Right"
5. To test the results click, "Start"
