Difference between revisions of "NVR/Recording Setup/RAID Hotspare"
(→Pre-Requisites) |
|||
| Line 1: | Line 1: | ||
==How to setup Hotspare== | ==How to setup Hotspare== | ||
| − | === | + | ===Prerequisites=== |
* An NVR that supports RAID and Hotspare | * An NVR that supports RAID and Hotspare | ||
* 3 or more hard drives installed on your NVR, including a drive that is not currently part of the RAID array. | * 3 or more hard drives installed on your NVR, including a drive that is not currently part of the RAID array. | ||
Revision as of 21:04, 25 July 2016
How to setup Hotspare
Prerequisites
- An NVR that supports RAID and Hotspare
- 3 or more hard drives installed on your NVR, including a drive that is not currently part of the RAID array.
- Completed the instructions to setup RAID Link Here
Step by Step Instructions to Setup Hotspare
1. Login to your NVR from the web interface.
Error creating thumbnail: Unable to save thumbnail to destination
2. Go to Setup->Storage->Advance
Error creating thumbnail: Unable to save thumbnail to destination
3. Select the drive you wish to assign as the Hotspare, and set that drive to "HDD Group 2"
Error creating thumbnail: Unable to save thumbnail to destination
4. Click, "OK"
Error creating thumbnail: Unable to save thumbnail to destination
5. Go to Setup->Storage->RAID->Hotspare
Error creating thumbnail: Unable to save thumbnail to destination
6. Click on the Error creating thumbnail: Unable to save thumbnail to destination
(pencil) icon.
Error creating thumbnail: Unable to save thumbnail to destination
7. Choose the RAID array you wish to assign the Hotspare drive to, and click, "OK"
Error creating thumbnail: Unable to save thumbnail to destination
8. Click, "OK" again on the confirmation dialogue.
Error creating thumbnail: Unable to save thumbnail to destination
9. Once complete, the drive should be listed under, "Type" as either, "Local Hotspare" or "Remote Hotspare"
Error creating thumbnail: Unable to save thumbnail to destination
