Difference between revisions of "NVR/Basic Setup/Initial Setup"
| Line 1: | Line 1: | ||
File:Standalone_DVR_Quick_Start_Guide_V1.0.0.pdf | File:Standalone_DVR_Quick_Start_Guide_V1.0.0.pdf | ||
| + | |||
===Boot up and Shutdown=== | ===Boot up and Shutdown=== | ||
====Boot up==== | ====Boot up==== | ||
Before the boot up, please make sure: | Before the boot up, please make sure: | ||
| − | *For device security, please connect the NVR to the power adapter first and then connect the device to the power socket. | + | |
| − | *The rated input voltage matches the device power on-off button. Please make sure the power wire connection is OK. Then click the power on-off button. | + | * For device security, please connect the NVR to the power adapter first and then connect the device to the power socket. |
| − | *Always use the stable current, if necessary UPS is a best alternative measure. | + | * The rated input voltage matches the device power on-off button. Please make sure the power wire connection is OK. Then click the power on-off button. |
| − | Please follow the steps listed below to boot up the device. | + | * Always use the stable current, if necessary UPS is a best alternative measure. |
| − | + | ||
| − | + | Please follow the steps listed below to boot up the device. | |
| − | + | 1. Connect the device to the monitor and then connect a mouse. | |
| + | 2. Connect power cable. | ||
| + | 3. Click the power button at the front or rear panel and then boot up the device. After device booted up, the system is in multiple-channel display mode by default. | ||
| + | |||
| + | ====Shutdown==== | ||
| + | * When you see corresponding dialogue box “System is shutting down…” Do not click power on-off button directly. | ||
| + | * Do not unplug the power cable or click power on-off button to shutdown device directly when device is running (especially when it is recording.) | ||
| + | |||
| + | |||
| + | There are three ways for you to log out. | ||
| + | |||
| + | # Main menu ('''RECOMMENDED''') | ||
| + | |||
| + | From Main Menu->Shutdown, select shutdown from dropdown list. | ||
| + | |||
| + | Click OK button, you can see device shuts down. | ||
| + | |||
| + | |||
| + | # From power on-off button on the front panel or remote control | ||
| + | |||
| + | Press the power on-off button on the NVR front panel or remote control for more than 3 seconds to shutdown the device. | ||
| + | |||
| + | |||
| + | # From power on-off button on the rear panel. | ||
Revision as of 16:31, 23 October 2015
File:Standalone_DVR_Quick_Start_Guide_V1.0.0.pdf
Boot up and Shutdown
Boot up
Before the boot up, please make sure:
- For device security, please connect the NVR to the power adapter first and then connect the device to the power socket.
- The rated input voltage matches the device power on-off button. Please make sure the power wire connection is OK. Then click the power on-off button.
- Always use the stable current, if necessary UPS is a best alternative measure.
Please follow the steps listed below to boot up the device. 1. Connect the device to the monitor and then connect a mouse. 2. Connect power cable. 3. Click the power button at the front or rear panel and then boot up the device. After device booted up, the system is in multiple-channel display mode by default.
Shutdown
- When you see corresponding dialogue box “System is shutting down…” Do not click power on-off button directly.
- Do not unplug the power cable or click power on-off button to shutdown device directly when device is running (especially when it is recording.)
There are three ways for you to log out.
- Main menu (RECOMMENDED)
From Main Menu->Shutdown, select shutdown from dropdown list.
Click OK button, you can see device shuts down.
- From power on-off button on the front panel or remote control
Press the power on-off button on the NVR front panel or remote control for more than 3 seconds to shutdown the device.
- From power on-off button on the rear panel.
