Difference between revisions of "NVR/Back Panel"

(→‎NVR70 Series)
(→‎NVR70-R Series)
Line 3,116: Line 3,116:
  
 
==NVR70-R Series==
 
==NVR70-R Series==
 +
The NVR70-R series rear panel is shown as below.
 +
 +
[[file:NVR70RBackPanel.png|500px]]
 +
 +
{| class="wikitable" width="565"
 +
|-
 +
| colspan="2" width="233"|
 +
Port Name
 +
 +
| width="332"|
 +
Function
 +
 +
|-
 +
| width="102"|
 +
Power switch
 +
 +
| width="131"|
 +
/
 +
 +
| width="332"|
 +
Power on-off button
 +
 +
|-
 +
| width="102"|
 +
Power input port
 +
 +
| width="131"|
 +
/
 +
 +
| width="332"|
 +
Input AC 100~240V.
 +
 +
|-
 +
| width="102"|
 +
MIC IN
 +
 +
| width="131"|
 +
Audio input port
 +
 +
| width="332"|
 +
Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.
 +
 +
|-
 +
| width="102"|
 +
MIC OUT
 +
 +
| width="131"|
 +
Audio output port
 +
 +
| width="332"|
 +
Audio output port. It is to output the analog audio signal to the devices such as the sound box.
 +
 +
* Bidirectional talk output.
 +
* Audio output on 1-window video monitor.
 +
* Audio output on 1-window video playback.
 +
 +
|-
 +
| width="102"|
 +
VIEDEO  OUT
 +
 +
| width="131"|
 +
Video output port
 +
 +
| width="332"|
 +
CVBS output
 +
 +
|-
 +
| width="102"|
 +
1～16
 +
 +
| width="131"|
 +
Alarm input port 1～16
 +
 +
| width="332"|
 +
* There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
 +
* When your alarm input device is using external power, please make sure the device and the NVR have the same ground.
 +
 +
|-
 +
| width="131"|
 +
GND
 +
 +
| width="332"|
 +
Alarm input ground port.
 +
 +
|-
 +
| width="102"|
 +
NO1～NO5
 +
 +
| rowspan="3" width="131"|
 +
Alarm output port 1～5
 +
 +
| rowspan="3" width="332"|
 +
* 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
 +
* NO: Normal open alarm output port.
 +
* C: Alarm output public end.
 +
* NC: Normal close alarm output port.
 +
 +
|-
 +
| width="102"|
 +
C1～C5
 +
 +
|-
 +
| width="102"|
 +
NC5
 +
 +
|-
 +
| width="102"|
 +
A
 +
 +
| rowspan="2" width="131"|
 +
RS-485 communication port
 +
 +
| width="332"|
 +
RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.
 +
 +
|-
 +
| width="102"|
 +
B
 +
 +
| width="332"|
 +
RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.
 +
 +
|-
 +
| width="102"|
 +
CTRL 12V
 +
 +
| width="131"|
 +
/
 +
 +
| width="332"|
 +
Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.
 +
 +
|-
 +
| width="102"|
 +
+12V
 +
 +
| width="131"|
 +
/
 +
 +
| width="332"|
 +
+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.
 +
 +
|-
 +
| width="131"|
 +
Network port
 +
 +
| width="332"|
 +
10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.
 +
 +
|-
 +
| width="102"|
 +
eSATA
 +
 +
| width="131"|
 +
eSATA port
 +
 +
| width="332"|
 +
External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.
 +
 +
|-
 +
| width="131"|
 +
USB2.0 port
 +
 +
| width="332"|
 +
USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.
 +
 +
|-
 +
| width="102"|
 +
RS-232
 +
 +
| width="131"|
 +
RS232 debug COM.
 +
 +
| width="332"|
 +
It is for general COM debug to configure IP address or transfer transparent COM data.
 +
 +
|-
 +
| width="102"|
 +
HDMI
 +
 +
| width="131"|
 +
High Definition Media Interface
 +
 +
| width="332"|
 +
High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources.
 +
 +
|-
 +
| width="102"|
 +
VGA
 +
 +
| width="131"|
 +
VGA video output port
 +
 +
| width="332"|
 +
VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.
 +
 +
|}
 +
 
==NVR42V-8P Series==
 
==NVR42V-8P Series==

Revision as of 18:04, 26 October 2015

Back Panel

NVR100/100-P Series

The NVR100 rear panel is shown as below.

NVR100BackPanel.png

The NVR100-P rear panel is shown as below.

NVR100PBackPanel.png

Port Name

Connection

Function

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

Network port

10M/100Mbps self-adaptive Ethernet port. Connect to the network cable.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

Power input port

Power socket.

  • For NVR100 series, input DC 5V/2A.
  • For NVR100-P series, input DC 48V/25A.

PoE PORT

PoE port

Built-in switch. Support PoE function.

For PoE series product, you can use this port to provide power to the network camera.

NVR11/11-P Series

The NVR11 rear panel is shown as below.

NVR11BackPanel.png

The NVR11-P rear panel is shown as below.

NVR11PBackPanel.png

Port Name

Connection

Function

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

Network port

10M/100Mbps self-adaptive Ethernet port. Connect to the network cable.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

GND

Ground end

Power input port

Power socket.

  • For NVR11 series, input DC 12V/2A.
  • For NVR11-P series, input DC 48V/25A.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

PoE PORT

PoE port

Built-in switch. Support PoE function.

For PoE series product, you can use this port to provide power to the network camera.

NVR41/41-P/41-8P/41-W Series

The NVR41 rear panel is shown as below.

NVR41BackPanel.png

The NVR41-P rear panel is shown as below.

NVR41PBackPanel.png

The NVR41-8P rear panel is shown as below.

NVR418PBackPanel.jpg

The NVR41-W rear panel is shown as below.

NVR41WBackPanel.png

Port Name

Connection

Function

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

Network port

10M/100Mbps self-adaptive Ethernet port. Connect to the network cable.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

GND

Ground end

/

Power input port

Power socket.

  • For NVR41 series, input DC 12V/2A.
  • For NVR41-P series, input DC 48V/5A.
  • For NVR41-8P series, input DC 48V/2A.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

PoE PORT

PoE port

Built-in switch. Support PoE function.

For PoE series product, you can use this port to provide power to the network camera.

Wireless AP

Support wireless hotspot function. Use WIFI to connect to the network camera when there is a hotspot.

For 41-W series only.

NVR11H/11H-P/41H/41H-P/41H-8P Series

The NVR11H/41H rear panel is shown below.

NVR11H41HBackPanel.png

The NVR11H-P/41H-P rear panel is shown below.

NVR11HP41HPBackPanel.png

The NVR41H-8P rear panel is shown below.

NVR41H8PBaskPanel.jpg

Port Name

Connection

Function

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

Network port

10M/100Mbps self-adaptive Ethernet port. Connect to the network cable.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

GND

Ground end

 /

Power input port

Power socket.

  • For NVR41 series, input DC 12V/2A.
  • For NVR41H-P series, input DC 48V/5A.
  • For NVR11H-P series, input DC 48V/25A.
  • For NVR41H-8P series, input DC 48V/2A.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

PoE PORT

PoE port

Built-in switch. Support PoE function.

For PoE series product, you can use this port to provide power to the network camera.

NVR42/42-P/42-8P Series

The NVR42 series rear panel is shown as below.

NVR42BackPanel.png

The NVR42-P series rear panel is shown as below.

NVR42PBackPanel.png

The NVR42-8P series rear panel is shown as below.

NVR428PBackPanel.png

Name

Function

Power switch

Power on/off button.

Power input port

Input DC 12V/5A.

For NVR42 series product only.

Switch power port. Input DC 48//1.04A.

For NVR42-P series product only.

Input AC 100~240V.

For NVR42-8P series product only.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

1～4

Alarm input port 1～4

  • There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

N1, N2

Alarm output port

1～2

  • 2 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO：Normal open alarm output port.
  • C：Alarm output public end.

C1, C2

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

  • 0 port
  

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS-232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

PoE  PORTS

/

Bult-in Switch. Support PoE.

The 4 PoE series product supports total 48V 50W.

The 8 PoE series product supports total 48V 120W. One PoE port max supports 15W.

NVR42-4K Series

The NVR42-4K series rear panel is shown as below.

NVR424KBackPanel.png

Icon

Port Name

Function

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

USB3.0 port

USB3.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS-232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

1～8

Alarm input port 1～8

  • There are two groups. The first group is from port 1 to port 4; the second group is from port 5 to port 8. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO3

Alarm output port 1～3

  • 3 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3）).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO：Normal open alarm output port.
  • C：Alarm output public end.

C1～C3

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

Power input port

Input DC 12V/4A.

Power switch

/

Power on/off button.

NVR42-8P-4K Series

The NVR42-8P-4K series rear panel is shown as below.

NVR428P4KBackPanel.png

Icon

Port Name

Function

Power socket

/

Input AC 220V.

Power switch

/

Power on/off button.

PoE  PORTS

PoE port

Built-in Switch，support PoE. The PoE PORTS can provide power to the network camera.  

The 8 PoE ports series product can support 48V 120W.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

USB3.0 port

USB3.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS-232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

1～4

Alarm input port 1～4

  • They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

N1,N2

Alarm output port 1～2

  • 2 groups of alarm output ports.（group 1：port NO1～C1, group 2：port NO2～C2）. Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO：Normal open alarm output port.
  • C：Alarm output public end.

C1～C2

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

NVR44/44-8P/44-16P Series

The NVR44 series rear panel is shown as below.

NVR44BackPanel.png

The NVR44-8P series rear panel is shown as below.

NVR448PBackPanel.png

The NVR44-16P series rear panel is shown as below.

NVR4416PBackPanel.png

Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

Video output port

CVBS output

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

PoE  PORTS

8 PoE ports

Built-in Switch. Support PoE.

The 8 PoE ports series products supports total 48V 120W power. One PoE port max supports 15W.

PoE  PORTS

16 PoE ports

Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W.

NVR44-4K/48-4K Series

These series rear panel is shown as below.

NVR444KBackPanel.png

Name

Function

Power switch

Power on-off button

Power input port

Input AC 100~240V.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB3.0 port

USB3.0 port. Connect to mouse, USB storage device, USB burner and etc.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4b.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

Ground

Alarm input ground end.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

NVR48/48-16P Series

The NVR48 series rear panel is shown as below.

NVR48BackPanel.png

The NVR48-16P series rear panel is shown as below.

NVR4816PBackPanel.png

Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output.

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

One 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS-232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

PoE  PORTS

16 PoE ports

Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W.

NVR72 Series

The NVR72 series rear panel is shown as below.

NVR72BackPanel.png

Name

Function

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

RS-232

RS-232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

1～8

Alarm input port 1～8

  • There are two groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO3

Alarm output port 1～3

  • 3 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3）).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO：Normal open alarm output port.
  • C：Alarm output public end.

C1～C3

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

Power input port

Input DC 12V/5A.

Power switch

/

Power on/off button.

NVR72-8P Series

The NVR72-8P series rear panel is shown as below.

NVR728PBackPanel.png


Name

Function

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

RS-232

RS-232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

1～8

Alarm input port 1～8

  • There are two groups. The first group is from port 1 to port 4; the second group is from port 5 to port 8. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO3

Alarm output port 1～3

  • 3 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3）).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO：Normal open alarm output port.
  • C：Alarm output public end.

C1～C3

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

Power input port

Input AC 100~240V.

Power switch

/

Power on-off button.

PoE  PORTS

/

Bult-in Switch. Support PoE.

The 8 PoE series product supports total 48V 120W. One PoE port max supports 15W.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

NVR74 Series

The NVR74 series rear panel is shown as below.

NVR74BackPanel.png

Icon

Name

Function

Power switch

Power on/off button.

Power input port

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3.

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

One 10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS-232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

NVR74-8P/74-16P Series

The NVR74-8P series rear panel is shown as below.

NVR748PBackPanel.png

The NVR74-16P series rear panel is shown as below.

NVR7416PBackPanel.png

Port Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

PoE  PORTS

8 PoE ports

Built-in Switch. Support PoE.

The 8 PoE ports series products supports total 48V 120W power. One PoE port max supports 15W.

PoE  PORTS

16 PoE ports

Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W.

NVR78 Series

The NVR78 series rear panel is shown as below.

NVR78BackPanel.png

Port Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS-232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

NVR78-16P Series

The NVR78-16P series rear panel is shown as below.

NVR7816PBackPanel.png

Port Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

PoE  PORTS

16 PoE ports

Built-in Switch. Support PoE. The 16 PoE ports series products supports total 150W power. One PoE port max supports 15W.

NVR78-RH Series

The NVR78-RH series rear panel is shown as below.

NVR78RHBackPanel.png

Port Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

NVR70 Series

The NVR70 series rear panel is shown as below.

NVR70BackPanel.png

Port Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

NVR70-R Series

The NVR70-R series rear panel is shown as below.

NVR70RBackPanel.png

Port Name

Function

Power switch

/

Power on-off button

Power input port

/

Input AC 100~240V.

MIC IN

Audio input port

Bidirectional talk input port. It is to receive the analog audio signal output from the devices such as microphone, pickup.

MIC OUT

Audio output port

Audio output port. It is to output the analog audio signal to the devices such as the sound box.

  • Bidirectional talk output.
  • Audio output on 1-window video monitor.
  • Audio output on 1-window video playback.

VIEDEO  OUT

Video output port

CVBS output

1～16

Alarm input port 1～16

  • There are four groups. The first group is from port 1 to port 4, the second group is from port 5 to port 8, the third group is from 9 to 12, and the fourth group is from 13 to 16. They are to receive the signal from the external alarm source. There are two types; NO (normal open)/NC (normal close).
  • When your alarm input device is using external power, please make sure the device and the NVR have the same ground.

GND

Alarm input ground port.

NO1～NO5

Alarm output port 1～5

  • 5 groups of alarm output ports. (Group 1：port NO1～C1,Group 2:port NO2～C2,Group 3:port NO3～C3, Group 4：port NO4～C4, Group 5: port NO5, C5, NC5).Output alarm signal to the alarm device. Please make sure there is power to the external alarm device.
  • NO: Normal open alarm output port.
  • C: Alarm output public end.
  • NC: Normal close alarm output port.

C1～C5

NC5

A

RS-485 communication port

RS485_A port. It is the cable A. You can connect to the control devices such as speed dome PTZ.

B

RS485_B.It is the cable B. You can connect to the control devices such as speed dome PTZ.

CTRL 12V

/

Controller 12V power output. It is to control the on-off alarm relay output. It can be used to control the device alarm output. At the same time, it can also be used as the power input source of some devices such as the alarm detector.

+12V

/

+12V power output port. It can provide the power to some peripheral devices such as the camera or the alarm device. Please note the supplying power shall be below 1A.

Network port

10M/100M/1000Mbps self-adaptive Ethernet port. Connect to the network cable.

eSATA

eSATA port

External SATA port. It can connect to the device of the SATA port. Please jump the HDD when there is peripheral connected HDD.

USB2.0 port

USB2.0 port. Connect to mouse, USB storage device, USB burner and etc.

RS-232

RS232 debug COM.

It is for general COM debug to configure IP address or transfer transparent COM data.

HDMI

High Definition Media Interface

High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.3. The two HDMI ports to output video from different video sources.

VGA

VGA video output port

VGA video output port. Output analog video signal. It can connect to the monitor to view analog video.

NVR42V-8P Series

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Back_Panel&oldid=1849"