Difference between revisions of "NVR/Recording Setup/Alarm Recording Setup SmartPSS 1.6"
(→Prerequisites) |
(→Video Instructions) |
||
| Line 8: | Line 8: | ||
===Video Instructions=== | ===Video Instructions=== | ||
<embedvideo service="youtube">x</embedvideo> | <embedvideo service="youtube">x</embedvideo> | ||
| + | |||
| + | ===Step by Step Instructions=== | ||
| + | 1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1" | ||
| + | |||
| + | [[file:PhysicalAlarmRecordSetup14.JPG|600px]] | ||
| + | |||
| + | 2. Connect the cable to your physical alarm. | ||
| + | |||
| + | [[file:PhysicalAlarmRecordSetup9Large.JPG|400px]]->[[file:PhysicalAlarmRecordSetup10Large.JPG|400px]] | ||
| + | |||
| + | 3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground" | ||
| + | |||
| + | [[file:PhysicalAlarmRecordSetup11Large.JPG|600px]] | ||
Revision as of 23:58, 11 October 2017
Description
SmartPSS 1.6 Alarm Setup
Prerequisites
- A NVR or IP Camera with an Alarm Out
- Smart PSS 1.16 or 1.16.4
Video Instructions
Step by Step Instructions
1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"
2. Connect the cable to your physical alarm.
->
3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"
