Difference between revisions of "NVR/Recording Setup/Alarm Recording Setup SmartPSS 1.6"

(→‎Step by Step Instructions)
(→‎Step by Step Instructions)
Line 33: Line 33:
  
 
6. Check mark Alarm Input Enable -> Select channel.
 
6. Check mark Alarm Input Enable -> Select channel.
 +
 +
[[file:alarmsmartpss1_16_5.png|600px]]

Revision as of 19:52, 12 October 2017

Description

SmartPSS 1.6 Alarm Setup

Prerequisites

  • A NVR or IP Camera with an Alarm Out
  • SmartPSS 1.16 or 1.161

Video Instructions

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPG->PhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG

4. Log into SmartPSS -> Device CFG.

Alarmsmartpss1 16.png

Alarmsmartpss1 16 3.png

5. From left hand side select recorder -> Under event select alarm.

Alarmsmartpss1 16 4.png

6. Check mark Alarm Input Enable -> Select channel.

Alarmsmartpss1 16 5.png

Retrieved from "https://DahuaWiki.com/index.php?title=NVR/Recording_Setup/Alarm_Recording_Setup_SmartPSS_1.6&oldid=27877"