Difference between revisions of "SmartPSS/LinkVideo/Event"
(→Step by Step Instructions) |
(→Step by Step Instructions) |
||
Line 15: | Line 15: | ||
1. Log into SmartPSS. | 1. Log into SmartPSS. | ||
− | [[File:|600px]] | + | [[File:linkvidsmartpss1.png|600px]] |
2. From the main menu select event config. | 2. From the main menu select event config. | ||
Line 27: | Line 27: | ||
5. Click on the link video tab. | 5. Click on the link video tab. | ||
− | [[File: | + | [[File:|600px]] |
6. Select recorder click on the arrow to show tree of cameras. | 6. Select recorder click on the arrow to show tree of cameras. |
Revision as of 18:36, 22 January 2018
Contents
SmartPSS Link Video Version 2.0 or above
Description
Have a window pop up during an event (motion, alarm, etc) on SmartPSS.
Prerequisites
- SmartPSS 2.0 or above.
- Dahua devices already added to SmartPSS.
- Event such as motion already enabled under event settings.
Video Instructions
Step by Step Instructions
1. Log into SmartPSS.
2. From the main menu select event config.
3. Select device.
[[File:|600px]]
4. For this tutorial, under channel event we are going to select motion.
5. Click on the link video tab.
[[File:|600px]]
6. Select recorder click on the arrow to show tree of cameras.
[[File:|600px]]
7. Select which cameras are to have a link video pop up. You can double click or left click hold camera selection to drag for a specific order if more than one camera is selected.
[[File:|600px]]
8. Select Save.
[[File:|600px]]
- Here you can see example of a video link (pop up window) during an occurring event.
[[File:|600px]]