Difference between revisions of "SmartPSS/LinkVideo/Event"
(→Step by Step Instructions) |
(→Step by Step Instructions) |
||
| Line 18: | Line 18: | ||
2. From the main menu select event config. | 2. From the main menu select event config. | ||
| + | |||
| + | [[File:linkvidsmartpss2.png|600px]] | ||
3. Select device. | 3. Select device. | ||
| − | [[File: | + | [[File:|600px]] |
4. For this tutorial, under channel event we are going to select motion. | 4. For this tutorial, under channel event we are going to select motion. | ||
Revision as of 18:50, 22 January 2018
Contents
SmartPSS Link Video Version 2.0 or above
Description
Have a window pop up during an event (motion, alarm, etc) on SmartPSS.
Prerequisites
- SmartPSS 2.0 or above.
- Dahua devices already added to SmartPSS.
- Event such as motion already enabled under event settings.
Video Instructions
Step by Step Instructions
1. Log into SmartPSS.
2. From the main menu select event config.
3. Select device.
[[File:|600px]]
4. For this tutorial, under channel event we are going to select motion.
5. Click on the link video tab.
[[File:|600px]]
6. Select recorder click on the arrow to show tree of cameras.
[[File:|600px]]
7. Select which cameras are to have a link video pop up. You can double click or left click hold camera selection to drag for a specific order if more than one camera is selected.
[[File:|600px]]
8. Select Save.
[[File:|600px]]
- Here you can see example of a video link (pop up window) during an occurring event.
[[File:|600px]]
