Difference between revisions of "ResetIPCamera"
Line 1: | Line 1: | ||
==Reset IP Camera== | ==Reset IP Camera== | ||
Reset Instruction of Network Camera | Reset Instruction of Network Camera | ||
+ | |||
This document includes the information of the reset operation and the position of reset button of | This document includes the information of the reset operation and the position of reset button of | ||
the network cameras. | the network cameras. | ||
+ | |||
1. THE OPERATION OF RESET | 1. THE OPERATION OF RESET | ||
+ | |||
1.1 The camera should connect power, click the reset button for at least 5 seconds until the | 1.1 The camera should connect power, click the reset button for at least 5 seconds until the | ||
camera restart, and then the camera will restore factory default setup. | camera restart, and then the camera will restore factory default setup. | ||
− | If there is a PWR indicator, you can check the indicator go off and on again. | + | <br> If there is a PWR indicator, you can check the indicator go off and on again. |
− | If it is a IR camera, you can check the IR LED turn on again. | + | <br> If it is a IR camera, you can check the IR LED turn on again. |
− | For others situation, keep the operation long enough to make sure the camera restart. | + | <br> For others situation, keep the operation long enough to make sure the camera restart. |
+ | |||
1.2 Most of the reset is a button, but some of them are just terminals or cables that you need to | 1.2 Most of the reset is a button, but some of them are just terminals or cables that you need to | ||
do a shortage to finish this operation. You will see some samples below. | do a shortage to finish this operation. You will see some samples below. | ||
+ | |||
2. THE POSITION OF THE RESET | 2. THE POSITION OF THE RESET | ||
− | Mainly it depends on the type of the camera, when you see the appearance you can make a | + | <br>Mainly it depends on the type of the camera, when you see the appearance you can make a |
judge accordingly. The types of the IP camera are listed below: | judge accordingly. The types of the IP camera are listed below: | ||
+ | |||
2.1 Indoor Fixed Network Camera | 2.1 Indoor Fixed Network Camera | ||
− | Appearance: | + | <br>Appearance: |
− | These kinds of IP cameras, the reset button is always on the back panel of the camera, with a | + | <br>These kinds of IP cameras, the reset button is always on the back panel of the camera, with a |
mark “RESET” | mark “RESET” | ||
− | Models: | + | <br>Models: |
− | IPC-HF3500 series | + | *IPC-HF3500 series |
− | IPC-HF3300 series | + | *IPC-HF3300 series |
− | IPC-HF3301 series | + | *IPC-HF3301 series |
− | IPC-HF3200 series | + | *IPC-HF3200 series |
− | IPC-HF3211 series | + | *IPC-HF3211 series |
− | IPC-HF3100 series | + | *IPC-HF3100 series |
− | IPC-HF3110 series | + | *IPC-HF3110 series |
− | IPC-HF3101 series | + | *IPC-HF3101 series |
+ | |||
The pictures below are the sample of back panel. (The appearance may not exactly the same) | The pictures below are the sample of back panel. (The appearance may not exactly the same) | ||
+ | |||
2.2 IR waterproof fixed network camera. | 2.2 IR waterproof fixed network camera. | ||
+ | |||
Some of these cameras (earlier models) were combined with Multiple-function combination | Some of these cameras (earlier models) were combined with Multiple-function combination | ||
Cable that you need to do a shortage to reset. | Cable that you need to do a shortage to reset. | ||
+ | |||
Appearance: | Appearance: | ||
− | Models: | + | <br>Models: |
− | HFW3300 series | + | *HFW3300 series |
− | HFW3110 series | + | *HFW3110 series |
+ | |||
The picture below is the cable coming out of the camera; you need an extension cable to | The picture below is the cable coming out of the camera; you need an extension cable to | ||
do the reset. Shortage the Blue wire (RESET) and the Orange wire (GND) for at least 5 | do the reset. Shortage the Blue wire (RESET) and the Orange wire (GND) for at least 5 |
Revision as of 21:12, 26 September 2018
Reset IP Camera
Reset Instruction of Network Camera
This document includes the information of the reset operation and the position of reset button of the network cameras.
1. THE OPERATION OF RESET
1.1 The camera should connect power, click the reset button for at least 5 seconds until the
camera restart, and then the camera will restore factory default setup.
If there is a PWR indicator, you can check the indicator go off and on again.
If it is a IR camera, you can check the IR LED turn on again.
For others situation, keep the operation long enough to make sure the camera restart.
1.2 Most of the reset is a button, but some of them are just terminals or cables that you need to do a shortage to finish this operation. You will see some samples below.
2. THE POSITION OF THE RESET
Mainly it depends on the type of the camera, when you see the appearance you can make a
judge accordingly. The types of the IP camera are listed below:
2.1 Indoor Fixed Network Camera
Appearance:
These kinds of IP cameras, the reset button is always on the back panel of the camera, with a
mark “RESET”
Models:
- IPC-HF3500 series
- IPC-HF3300 series
- IPC-HF3301 series
- IPC-HF3200 series
- IPC-HF3211 series
- IPC-HF3100 series
- IPC-HF3110 series
- IPC-HF3101 series
The pictures below are the sample of back panel. (The appearance may not exactly the same)
2.2 IR waterproof fixed network camera.
Some of these cameras (earlier models) were combined with Multiple-function combination Cable that you need to do a shortage to reset.
Appearance:
Models:
- HFW3300 series
- HFW3110 series
The picture below is the cable coming out of the camera; you need an extension cable to do the reset. Shortage the Blue wire (RESET) and the Orange wire (GND) for at least 5 seconds until the camera restart. Multiple combination cable and MD9M cable MD9M cable connector 2.3 IR Waterproof Fixed Network Camera (With Integrated Bracket) Appearance: A. Most of this kind of camera, there will be a multiple-function combination cable coming out of the bottom of the bracket. You can find one that is the reset cable. Models: IPC-HFW3300C IPC-HFW3200C IPC-HFW3202C IPC-HFW3100C IPC-HFW3101C The pictures below are the sample of multi-function cable, and the reset is a button. (The appearance may not exactly the same) B. Some earlier models There is also a multiple-function combination cable; the reset terminal is together with the alarm terminal (you can find the label), you need shortage the RESET and GND pin (7&6 in the picture below) for at least 5 seconds to make a reset. 2.4 Mini IR Waterproof Fixed Network Camera (With Integrated Bracket) Appearance: Models: IPC-HFW3200SP/N series IPC-HFW2100S series The reset button is inside of the camera, open the lens cap and you will find it. 2.5 ( IR) Vandal Proof Network Dome Camera (and In-ceiling model) Appearance: Models: IPC-HD/HDW3100 series IPC-HD/HDW3200 series IPC-HDB/HDBW3202 series IPC-HDB/HDBW3101 series IPC-HDB/ HDBW5100 series IPC-HDB/ HDBW5200 series IPC-HDB/HDBW 3202-DI series (DI means in-ceiling model) IPC-HDB/HDBW 3200-DI series IPC-HDB/HDBW 3101-DI series IPC-HDB/HDBW 3100-DI series The reset button is inside of the camera, open the dome camera enclosure; you will find it next to the alarm terminals (see the picture below). 2.6 Mini dome Appearance: Models: IPC-HDB3200C series IPC-HDB3100C series IPC-HD2100C series The reset is inside the camera, open the dome camera enclosure and you can find it. 2.7 Mobile Network Camera (and some dome network camera) Appearance: Models: IPC-HDW2100-M IPC-HDW2100 Series IPC-HDW2200S IPC-HDW3300S The reset button is inside of the camera, open the dome camera enclosure and will find it under the IR board.(see picture below) 2.8 Home use series Appearance: This type of network camera is very simple and small, and there reset button is mostly on the back or side of the camera. a. K100 series (on the back) A6 series (on the side) A7 series (on the back) A8 series (back in the cover) Note: For the models not included, you can check the appearance as a reference.