Difference between revisions of "DayNight"

(Created page with "==Day/night config switch is invalid.== Possible reason: device system time is not corresponding to computer time.  # Single click “Camera setting > Camera property > Conf...")
 
Line 2: Line 2:
 
Possible reason: device system time is not corresponding to computer time. 
 
Possible reason: device system time is not corresponding to computer time. 
  
# Single click “Camera setting > Camera property > Configuration file management > Switch according to time” in the WEB interface, set time period according to the computer time. 
+
# Log into the web interface of the camera. Click on System,General and then the date and time option.
 +
# Set time period according to the computer time.  
 
# Synchronize the device time and current PC time.
 
# Synchronize the device time and current PC time.
 +
# Log into the web interface of the recorder. Click on General,Setup and then the data and time option.
 +
 +
[[File:IPCDateandTime.jpg|none|800x398px]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
[[File:IPCSystemDateTime.jpg|none|800x398px]]

Revision as of 16:29, 11 December 2015

Day/night config switch is invalid.

Possible reason: device system time is not corresponding to computer time. 

  1. Log into the web interface of the camera. Click on System,General and then the date and time option.
  2. Set time period according to the computer time.  
  3. Synchronize the device time and current PC time.
  4. Log into the web interface of the recorder. Click on General,Setup and then the data and time option.
IPCDateandTime.jpg






IPCSystemDateTime.jpg