Difference between revisions of "DVRTroubleshoot"

(I can not use the P2P function on my cell phone or the WEB.)
(DDNS registration failed or can not access the device domain name.)
Line 30: Line 30:
 
*Check the device supports camera main stream/sub stream resolution or not (such as 1080P, 720P, 960H, D1, HD1 and etc.).
 
*Check the device supports camera main stream/sub stream resolution or not (such as 1080P, 720P, 960H, D1, HD1 and etc.).
 
*Check the camera setup. Please make sure It supports the products of other manufacturers.  
 
*Check the camera setup. Please make sure It supports the products of other manufacturers.  
===DDNS registration failed or can not access the device domain name.===
 
There are following possibilities:
 
*Check the device is connected to the WAN. Please check the device has got the IP address if the PPPoE can dial. If there is a router, please check the router to make sure the device IP is online.
 
*Check the corresponding protocol of the DDNS is enabled. Check the DDNS function is OK or not.
 
*Check DNS setup is right or not. Default Google DNS server is 8.8.8.8, 8.8.5.5. You can use different DNS provided by your ISP.
 
 
===I connect the standard definition camera to the device, there is no video output.===
 
===I connect the standard definition camera to the device, there is no video output.===
 
There are following possibilities:
 
There are following possibilities:

Revision as of 22:31, 5 October 2015

I connect the general analog camera to the device, there is no video output.

There are following possibilities:

  • Check camera power supplying, data cable connection and etc.
  • This series device does not support the analog camera of all brands. Please make sure the device supports general standard definition analog camera.

I connect the standard definition analog camera or the HDCVI camera to the device, there is no video output.

There are following possibilities:

  • Check camera power supplying, or camera data cable connection.
  • For the product supports analog standard definition camera/HD camera, you need to go to the main menu*>Setting*>Camera*>Channel type to select corresponding channel type and then restart the DVR.

I can not connect to the IP channel.

There are following possibilities:

  • Check the camera is online or not.
  • Check IP channel setup is right or not (such as IP address, user name, password, connection protocol, port number.).
  • The camera has set the whitelist (Only the specified devices can connect to the camera).

After I connected to the IP channel, there one*window output is OK, but there is no multiple*window output.

There are following possibilities:

  • Check the sub stream of the camera has been enabled or not.
  • Check the sub stream type of the camera is H.264 or not.
  • Check the device supports camera sub stream resolution or not (such as 960H, D1, HD1 and etc.).

After I connected to the IP channel, there multiple*window output is OK, but there is no one*window output.

There are following possibilities:

  • Check there is video from the IP channel or not. Please go to the main menu*>info*>System*>BPS to view bit stream real*time information.
  • Check the main stream of the camera has been enabled or not.
  • Check the main stream type of the camera is H.264 or not.
  • Check the device supports camera main stream resolution or not (such as 960H, D1, HD1 and etc.).
  • Check camera network transmission has reached the threshold or not. Please check the online user of the camera.

After I connected to the IP channel, there is no video output in the one*window or the multiple*window mode. But I can see there is bit stream.

There are following possibilities:

  • Check the main stream/sub stream type of the camera is H.264 or not.
  • Check the device supports camera main stream/sub stream resolution or not (such as 1080P, 720P, 960H, D1, HD1 and etc.).
  • Check the camera setup. Please make sure It supports the products of other manufacturers.

I connect the standard definition camera to the device, there is no video output.

There are following possibilities:

  • Check the DVR supports standard definition signal or not. Only some series product supports analog standard definition signal, HDCVI signal input.
  • Check channel type is right or not. For the product supports analog standard definition camera/HD camera, you need to go to the main menu*>Setting*>Camera*>Channel type to select corresponding channel type (such as analog) and then restart the DVR. In this way, the DVR can recognize the analog standard definition.
  • Check camera power supplying, or camera data cable connection.

I can not connect to the IP camera.

There are following possibilities:

  • Check DVR supports IP channel or not. Only some series products support A/D switch function, it can switch analog channel to the IP channel to connect to the IP camera. From Setting*>Camera*>Channel Type, select the last channel to switch to the IP channel. Some series product products support IP channel extension, it supports N+N mode.
  • Check the IPC and the DVR is connected or not. Please go to the main menu*>Setting*>Camera*>Remote to search to view the IP camera is online or not. Or you can go to the main menu*>Info*>Network*>Test, you can input IP camera IP address and then click the Test button to check you can connect to the IP camera or not.
  • Check IP channel setup is right or not (such as IP address, manufacturer, port, user name, password, remote channel number and etc.).