Difference between revisions of "VideoLossCamBoth"
(Created page with "===After I connected to the IP channel, there is no video output in the one*window or the multiple*window mode. But I can see there is bit stream.=== There are following possi...") |
(No difference)
|
Revision as of 23:06, 5 October 2015
After I connected to the IP channel, there is no video output in the one*window or the multiple*window mode. But I can see there is bit stream.
There are following possibilities:
- Check the main stream/sub stream type of the camera is H.264 or not.
- Check the device supports camera main stream/sub stream resolution or not (such as 1080P, 720P, 960H, D1, HD1 and etc.).
- Check the camera setup. Please make sure It supports the products of other manufacturers.
