Difference between revisions of "SmartPSS/How To Setup Event Alarm Link"

Revision as of 18:35, 28 March 2019

How To Setup Event Alarm Link In SmartPSS

Description

This article will show you how to setup the Event Alarm Link feature in SmartPSS 2.0

Prerequisites

• SmartPSS
• Devices added to SmartPSS Device List - How To Add Device to SmartPSS

Video Instructions

Coming Soon

Step by Step Instructions

1. Launch SmartPSS.

2. Click 'Event Config'

3. The Event Config menu will appear.

4. Click to select the device you wish to configure from the Device Tree on the left

5. Select the Event Type for this camera

6. Use the tabs on the right to set up the parameters for when the Event is triggered.

Notify

When the event occurs it can give a notification.

Notification types

Alarm Sound: Play sound at local computer

EMap Twinkle: Twinkle notification on EMap

Send Mail: Send an email

Link Video

When event occurs it can link to a live camera preview or record.

Drag and drop a device from device tree into the grid layout in the center of the screen

Select from the pre-configured layouts or create your own

• Preset point: Allows the user to select a preset point for supported cameras such as PTZ - SmartPSS/How To Use PTZ Preset in SmartPSS
• Stream Type: Select which video stream: Main Stream, Sub Stream1, etc.
• Duration: Time (in seconds) for video .
• Operation: Use the X icon to delete

Alarm Output

When event occurs it can output a signal to trigger an alarm directly on the camera.

Select the device from the device tree

Set Auto Open

Duration: Enter a time for the alarm output (in seconds)

Defence Time

Set a schedule for the Alarm.

The event will be automatically programmed to run at all times, represented by the Green color

In the center of the screen click and drag the mouse to delete or add time

600px

OR you can click the Gear to open a pop up menu to define the parameters of the schedule