Difference between revisions of "SmartPSS/How To Setup Video Talk"

(How To Setup Video Talk In SmartPSS)
(How To Setup Video Talk In SmartPSS)
Line 16: Line 16:
  
 
===Video Instructions===
 
===Video Instructions===
<embedvideo service="youtube">https://youtu.be/lIpqJUuckzI</embedvideo>
+
<embedvideo service="youtube">https://youtu.be/-fP_b2Fbfv4</embedvideo>
  
  

Revision as of 21:00, 3 April 2019

How To Setup Video Talk In SmartPSS

Description

This article will show you how to setup and use Video Talk in SmartPSS 2.0

Prerequisites

  • Device with video talk capabilities configured with local computer:

For example DHI-VTO2111D-WP, the MGT Centre IP Address must be set as the computer running SmartPSS

How To Setup Video Talk SmartPSS - intercom set up.jpg

Video Instructions


Step by Step Instructions

1. Launch SmartPSS.

Preset SmartPSS 1.jpg

2. Click Intercom

How To Setup Video Talk SmartPSS - 1.5.jpg

3. Click the VTS icon on the left to enter the VTS Settings menu

How To Setup Video Talk SmartPSS - 2.jpg

4. Click the IP icon to edit the setting

How To Setup Video Talk SmartPSS - 3.jpg

5.Enter the local IP of the computer running SmartPSS

How To Setup Video Talk SmartPSS - 4.jpg

Setup is complete

6. Click on Monitor

How To Setup Video Talk SmartPSS - 5.jpg

8. Double Click the device the device list on the left side of the screen, then double click the video pane to bring the feed up in full screen

How To Setup Video Talk SmartPSS - 6.jpg

9. Hover the mouse over the window to show the menu

How To Setup Video Talk SmartPSS - 7.jpg

10. Click the Shout icon Shout icon.jpg to begin a Video Talk

How To Setup Video Talk SmartPSS - 8.jpg


The icon will change to Shout enabled icon.jpg when active.

Click the icon again to end.


Alternatively, you can Right Click the video feed and select Start/End Shout from menu

How To Setup Video Talk SmartPSS - 9.jpg