Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "IPPTZ/Pelco and RS485"
(Created page with "=Pelco and RS485= ==IP PTZs== Disclaimer: Depending on your PTZ model, these features might not work. *Call preset 28 or preset 95 to go to dome menu *Call preset 29 or pres...") |
(→HD-CVI PTZs) |
||
Line 16: | Line 16: | ||
*Set preset 23 or 80 to stop record. | *Set preset 23 or 80 to stop record. | ||
==HD-CVI PTZs== | ==HD-CVI PTZs== | ||
+ | '''Please note the IR speed dome can automatically recognize the industrial standard protocol, PELCO-D. PELCO-P. Usually you do not need to set the protocol.''' |
Revision as of 14:41, 29 April 2019
Pelco and RS485
IP PTZs
Disclaimer: Depending on your PTZ model, these features might not work.
- Call preset 28 or preset 95 to go to dome menu
- Call preset 29 or preset 99 to go to scan.
- Call preset 24 or preset 81 to go to pattern.
- Call preset 25 or preset 82 to go to tour.
- Call preset 30 or preset 96 to stop scan or pattern.
- Call preset 31 or preset 83 to begin rotation.
- Call preset 33 to enable PTZ 180 degrees rotation.
- Call preset 34 to set dome position as 0.
- Set preset 26 or 92 to set scan left limit
- Set preset 27 or 93 to set scan right limit.
- Set preset 22 or 79 to begin record.
- Set preset 23 or 80 to stop record.
HD-CVI PTZs
Please note the IR speed dome can automatically recognize the industrial standard protocol, PELCO-D. PELCO-P. Usually you do not need to set the protocol.