Difference between revisions of "SDCard2"
(Created page with "==SD card failed to store video.== # Check if the SD card status is set as read only status, if so; you need to change it to read/write status. # Check if the SD card can be...") |
(No difference)
|
Revision as of 00:04, 6 October 2015
SD card failed to store video.
- Check if the SD card status is set as read only status, if so; you need to change it to read/write status.
- Check if the SD card can be detected.
- Check if the SD card has been damaged.
- Check if the SD card is full, if it shows that the residual space is 0, you can format the SD card by WEB interface or check “Cover” in the “Storage management > Video control > hard disk full” of the WEB interface.
