Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "PTZ Pattern Setup"
Line 30: | Line 30: | ||
2.Right click and select PTZ from the drop down menu | 2.Right click and select PTZ from the drop down menu | ||
− | [[File:selectptzmenu1.png| | + | [[File:selectptzmenu1.png|600px]] |
3.Click the arrow on the right hand side to expand the menu | 3.Click the arrow on the right hand side to expand the menu | ||
− | [[File:expandptzmenu.png| | + | [[File:expandptzmenu.png|600px]] |
4.Click Pattern from the icon shown below | 4.Click Pattern from the icon shown below | ||
− | [[File:clickpattern.png| | + | [[File:clickpattern.png|600px]] |
5.Use the arrows to create your pattern | 5.Use the arrows to create your pattern | ||
6.Select pattern again to finish this process | 6.Select pattern again to finish this process |
Revision as of 16:55, 9 July 2019
Contents
HDCVI Pattern Tutorial
Description
How To Dewarp set up a pattern for your PTZ
Step by step instructions From Web Browser
1.Log into your device from its IP address in your web browser
2.Select the down arrow to expand your PTZ Control Menu
3.Select Pattern from the drop down menu
4.Select Start Record
5.Using the Arrows on the PTZ menu Draw the pattern you wish your PTZ to follow
6.Select Stop Record
Your pattern should now be applied to the Pattern number selected.
Step By Step Instructions From local Monitor
1.Log into your DVR
2.Right click and select PTZ from the drop down menu
3.Click the arrow on the right hand side to expand the menu
4.Click Pattern from the icon shown below
5.Use the arrows to create your pattern
6.Select pattern again to finish this process