Difference between revisions of "New GUI/Update Recorder Firmware via USB"
(Created page with "==How to Update Firmware via USB== ===Description=== Follow these instructions to update the firmware on a recorder using a USB storage drive. Be sure to download the appropri...") |
|||
| Line 11: | Line 11: | ||
===Step by Step Instructions=== | ===Step by Step Instructions=== | ||
| + | ''USB drive with Firmware file should be plugged into USB slot on recorder | ||
| + | '' | ||
| + | 1. From the Main Menu, click Operation | ||
| − | + | [[File:How_To_Update_Firmware_via_USB_-_NewUI_-_1.jpg]] | |
| + | |||
| + | |||
| + | 2. Click System Maintain > Upgrade | ||
| + | |||
| + | [[File:How_To_Update_Firmware_via_USB_-_NewUI_-_2.jpg]] | ||
| + | |||
| + | |||
| + | 3. Click the System Upgrade in the middle of the page. | ||
| + | |||
| + | |||
| + | [[File:How_To_Update_Firmware_via_USB_-_NewUI_-_3.jpg]] | ||
| + | |||
| + | 4. Select the Firmware file from the list | ||
| + | |||
| + | Click OK | ||
| + | |||
| + | [[File:How_To_Update_Firmware_via_USB_-_NewUI_-_4.jpg]] | ||
| + | |||
| + | 5. The firmware update will begin. | ||
| + | |||
| + | Make sure to not unplug the power during this process. | ||
| + | |||
| + | [[File:How_To_Update_Firmware_via_USB_-_NewUI_-_5.jpg]] | ||
| + | |||
| + | |||
| + | 6. The NVR will reboot as the final step of the process | ||
| + | |||
| + | [[File:How_To_Update_Firmware_via_USB_-_NewUI_-_6.jpg]] | ||
Revision as of 16:54, 5 August 2019
Contents
How to Update Firmware via USB
Description
Follow these instructions to update the firmware on a recorder using a USB storage drive. Be sure to download the appropriate firmware for your device.
Prerequisites
- USB Drive 1GB or more
- The proper firmware file for the device
- Physical access to the recording device
- A computer to load the firmware files onto the USB
Video Instructions
Step by Step Instructions
USB drive with Firmware file should be plugged into USB slot on recorder 1. From the Main Menu, click Operation
2. Click System Maintain > Upgrade
3. Click the System Upgrade in the middle of the page.
4. Select the Firmware file from the list
Click OK
5. The firmware update will begin.
Make sure to not unplug the power during this process.
6. The NVR will reboot as the final step of the process
