Difference between revisions of "New GUI/AI/Intrusion Setup"

Line 37: Line 37:
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_6.jpg|500px]]
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_6.jpg|500px]]
  
 +
6. Use the drop-down box to select the Channel
  
 +
Then click Add in the lower right side of the screen to Add an IVS rule
 +
 +
[[File:How_To_Setup_Intrusion_-_NewUI_-_7.jpg|500px]]
 +
 +
8. The created rule will appear in the list
 +
 +
[[File:How_To_Setup_Intrusion_-_NewUI_-_8.jpg|500px]]
  
  

Revision as of 19:57, 7 August 2019

How To Setup Intrusion Detection

Description

This article will show you how to setup the Intrusion IVS feature on a supported device

Prerequisites

  • Supported device with Intrusion feature

Video Instructions

Coming Soon

Step by Step Instructions

1. From the Main Menu click AI

How To Setup Intrusion - NewUI - 1.jpg

2. Click Parameters > Smart Plan

How To Setup Intrusion - NewUI - 2.jpg

3. Use the drop down box to select the Channel

How To Setup Intrusion - NewUI - 3.jpg

4. Click the IVS icon to enable.

How To Setup Intrusion - NewUI - 4.jpg

The icon will highlight when selected.

Click Apply

How To Setup Intrusion - NewUI - 5.jpg

5. Click Parameters > IVS

How To Setup Intrusion - NewUI - 6.jpg

6. Use the drop-down box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

How To Setup Intrusion - NewUI - 7.jpg

8. The created rule will appear in the list

How To Setup Intrusion - NewUI - 8.jpg















1. Enter the Main Menu

  • Right click at live view then select "Main Menu"

Tripwire Setup - NewGUI - 1.jpg

2. Click Smart Detection

Tripwire Setup - NewGUI - 2.jpg

3. Click Smart Plan

Tripwire Setup - NewGUI - 3.jpg

4. Click to Select IVS (Light Bulb icon)

Tripwire Setup - NewGUI - 4.jpg

When enabled the icon will highlight

Click Apply to save changes

Tripwire Setup - NewGUI - 5.jpg

6. Click Parameters

Tripwire Setup - NewGUI - 6.jpg

7. Use the dropdown box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

Tripwire Setup - NewGUI - 7.jpg

8. The created rule will appear in the list

Tripwire Setup - NewGUI - 8.jpg

9. Use the dropdown box to change the Rule Type to "Intrusion"

How To Setup Intrusion - NewUI - 1.jpg