Difference between revisions of "New GUI/AI/Intrusion Setup"

Revision as of 21:23, 7 August 2019

How To Setup Intrusion Detection

Description

This article will show you how to setup the Intrusion IVS feature on a supported device

Prerequisites

• Supported device with Intrusion feature

Video Instructions

Coming Soon

Step by Step Instructions

1. From the Main Menu click AI

2. Click Parameters > Smart Plan

3. Use the drop down box to select the Channel

4. Click the IVS icon to enable.

The icon will highlight when selected.

Click Apply

5. Click Parameters > IVS

6. Use the drop-down box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

8. The created rule will appear in the list

9. Use the dropdown box to change the Rule Type to "Intrusion"

10. Click the Pencil icon to draw the Intrusion rule

11. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the detection area for the Intrusion.

Right click to end drawing.

12. You can use the Intrusion menu that appears for additional rule settings:

• Name: A name can be applied to the rule
• Action
  • Appear
  • Cross
• Direction

Click icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click icon to clear the current rule

Once the Intrusion rule settings have been created click OK

1. Enter the Main Menu

• Right click at live view then select "Main Menu"

2. Click Smart Detection

3. Click Smart Plan

4. Click to Select IVS (Light Bulb icon)

When enabled the icon will highlight

Click Apply to save changes

6. Click Parameters

7. Use the dropdown box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

8. The created rule will appear in the list

9. Use the dropdown box to change the Rule Type to "Intrusion"