Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "New GUI/Instructions/IVS Record"
Line 79: | Line 79: | ||
[[File:NGUI-IVSRECORDING-13.jpg|1000px]] | [[File:NGUI-IVSRECORDING-13.jpg|1000px]] | ||
+ | |||
[[Category:Tutorial]] | [[Category:Tutorial]] | ||
Line 84: | Line 85: | ||
[[Category:Setup]] | [[Category:Setup]] | ||
[[Category:How To]] | [[Category:How To]] | ||
+ | [[Category:IVS]] |
Revision as of 19:46, 14 August 2019
Contents
New GUI - IVS Record Setup
Description
Dahua NVRs and DVRs offer a variety of recording options. You can configure recording schedules based on the following methods:
- General
- Motion Detection
- Alarm Based
- Motion Detection + Alarm
- IVS if the feature is available depending on the model.
For this tutorial we will be setting up IVS recording. We will be using the X72A2A and DH-IPC-HDW44A1MN-I to set this up.
Prerequisites
- Dahua Recorder with new GUI and supportive IVS features
- Dahua Camera with IVS rule and Smartplan enabled
Step by Step Instructions
Step One:
Creating an IVS Rule on the camera and enabling Smartplan
- Login to the Camera's WEBUI
- Go to Settings>Events>IVS
- Click on the green "+" icon to add a rule. You can also rename the rule by double clicking under "Name". We will be adding a Tripwire in this example
- Click on Draw Rule to start drawing
-Left-Click for starting point and Left-Click again for end point
-Right-Click to finish
- Change the direction you want to the tripwire to go off, enable "Record" and click on save when you're done enabling the settings.
- Smartplan is crucial, it MUST be enabled so our IVS rules can take affect. Highlight "IVS" and save it.
Step Two:
Adding the camera to the recorder and enabling Intel recording
- Login to the recorder and go to Camera>Registration>Manual Add
- Type in the information it asks for and click on save when finished, we will be adding this camera to channel 7
- Now lets go to Storage>Schedule, select the channel and click on the "Settings" tab on the right side
- Keep "Intel" checked and copy it to all days, save it
- Click on "Save" to finalize the changes
- In the main menu go to "Video"
- Select the channel with the IVS rules, you can now see the recordings of when that tripwire was tripped