Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:IVS Intrusion SmartPSS"
(Created page with " ===SmartPSS 2 Setup=== ====Prerequisites==== * SmartPSS * IVS capable device with IntrusionDetection * Upgraded devices to latest firmware ====Video Instructions==== <embed...") |
|||
Line 1: | Line 1: | ||
− | + | ===Description=== | |
− | === | + | This guide will show how to setup the Intrusion IVS feature in SmartPSS |
− | + | ===Prerequisites=== | |
− | + | * Dahua device with Intrusion IVS feature (added to SmartPSS) | |
− | + | ===Video Instructions=== | |
− | * | + | <embedvideo service="youtube">https://youtu.be/L4ZCrIFcZXs</embedvideo> |
− | |||
− | |||
− | |||
− | <embedvideo service="youtube"> | ||
====Step by Step Instructions==== | ====Step by Step Instructions==== | ||
Revision as of 17:58, 6 December 2019
Description
This guide will show how to setup the Intrusion IVS feature in SmartPSS
Prerequisites
- Dahua device with Intrusion IVS feature (added to SmartPSS)
Video Instructions
Step by Step Instructions
1. Go to Live View.
2. Right click on a device and select IVS Channel cfg.
3. Select IVS and click Next.
4. Under Detect Region, Draw your rule and apply.
5. Under Rule config -> Target Filter -> Draw the rule -> Apply -> save.
6. Under Rule config -> Rule Details -> Add rule -> Select Intrusion -> Draw.
7. Draw -> Apply -> Save.