Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "PTZ/Instructions/Preset"
Line 31: | Line 31: | ||
</div> | </div> | ||
− | |||
− | |||
− | |||
</div> | </div> |
Revision as of 18:00, 9 January 2020
Contents
- 1 Preset
- 1.1 Instructions
- 1.2 Prerequisites
- 1.3 Video Instructions
- 1.4 Step By Step Instructions From local Monitor
- 1.5 Prerequisites
- 1.6 Video Instructions
- 1.7 Step by step instructions From Web Browser
- 1.8 Prerequisites
- 1.9 Video Instructions
- 1.10 Step by Step Instructions
- 1.11 Prerequisites
- 1.12 Video Instructions
- 1.13 Step by Step Instructions
Preset
Instructions
Prerequisites
1. Dahua Recorder using the old GUI
2. Mouse/Monitor Connected to the device
Video Instructions
Step By Step Instructions From local Monitor
1.Log into your DVR
2.Right click and select PTZ from the drop down menu
3.Click the arrow on the right hand side to expand the menu
4.Click Aux Config from the icon shown below
5.Move the camera to the desired preset position
6.Click Setting to set the preset to the currently defined preset number
![Setpreset.png](/images/thumb/6/60/Setpreset.png/800px-Setpreset.png)
Prerequisites
1. Computer with web browser access to Dahua camera/recorder
Video Instructions
Step by step instructions From Web Browser
1.Enter your DVR's IP Address in the URL section of your browser
2.Log Into your Recorder with Admin permissions
3.Double Click your PTZ to pull up live view
4.Expand the PTZ Menu by clicking the down arrow
5.Expand the dropdown menu and select Preset
6.Select add to set the current position to preset one
![Selectpresetadd.png](/images/thumb/1/14/Selectpresetadd.png/800px-Selectpresetadd.png)
Prerequisites
1. Computer with web browser access to Dahua camera/recorder
Video Instructions
Step by Step Instructions
1. Open Internet Explorer and login to your Recorder
2. Select Live View
3. Double click your camera from the list to pull up live view
4. Use the Directional arrows to locate the desired preset location
5. Enter Desired Preset number and select add
You can now select go to and the PTZ will move to the set locationPrerequisites
1. Computer with SmartPSS Installed
2. Dahua PTZ added to the software directly or through the recorder
Video Instructions
Step by Step Instructions
1. Select Live View
2. Double Click the PTZ camera from your device list
3. Expand the PTZ Menu and select More functions
4. Set Desired Preset Location
5. Click the Settings Gear in the bottom of the PTZ Menu
6. Select the desired preset number and select save
![Selectpresetandsavepresetp.png](/images/thumb/6/6c/Selectpresetandsavepresetp.png/600px-Selectpresetandsavepresetp.png)
</div>