Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:PTZ Tour WebUI Old"
Line 1: | Line 1: | ||
+ | |||
==How to Setup Tour== | ==How to Setup Tour== | ||
===Description=== | ===Description=== |
Revision as of 18:45, 10 January 2020
Contents
How to Setup Tour
Description
Tour allows the PTZ camera to move and cycle between established Preset locations
This guide will show how to create and run a Tour in the WebUI (Old)
Prerequisites
- Dahua Network PTZ
- Internet Explorer
- IP Address of Network PTZ
- PTZ Presets created - How To Setup PTZ Presets
Video Instructions
Step by Step Instructions
1. Login to your IP PTZ camera via Internet Explorer.
2. Click Setting
Then under PTZ, click Function
3. Click Preset
Confirm presets have been created and appear in the list. Creating a tour requires starting by creating presets for the camera
4. Click Tour
5. Click Add to create a new Tour
6. Click Add to begin adding steps to the tour. Add as many steps as required
7. Click inside the field under the Preset column to edit
Use the drop-down box to select the Preset
The same adjustments can be made for Duration and Speed for each step to configure the tour as desired
8. Click Save
9. To test the created Tour
Click Live
10. Use the dropdown box under PTZFunction to select Tour
11. Enter the Tour #
Click Start to begin the Tour
12. The Tour will begin and display the current status/preset position