Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "PTZ/Instructions/Electronic Image Stabilization EIS"
(→New Template) |
(→New Template) |
||
| Line 3: | Line 3: | ||
==Prerequisites== | ==Prerequisites== | ||
==Instructions== | ==Instructions== | ||
| − | |||
<div class="toccolours mw-collapsible mw-collapsed"> | <div class="toccolours mw-collapsible mw-collapsed"> | ||
Revision as of 19:19, 20 January 2020
Contents
Electronic Image Stabilization-EIS
Description
Prerequisites
Instructions
WebUI Old
How to Setup EIS via Old WebUI
Prerequisites
- Internet Explorer
Video Instructions
Step by Step Instructions
1. Follow the steps below to enable EIS on the camera.
Setting => Camera => Conditions => Picture => EIS (select the option "On") => Save
SmartPSS
How to Setup EIS via SmartPSS
Prerequisites
- SmartPSS
Video Instructions
Step by Step Instructions
1. Select "Device" to add the PTZ camera.
2. Add the PTZ camera.
3. Go back to main menu and select "Device CFG".
4. Choose the camera to be configured, expand the right arrow, and select "Camera".
5. A pop-up window will appear. Under "Properties" => Camera => Enable "EIS" => Click "Save" to confirm the changes.
6. A pop-up window will appear stating the changes are saved.
