Difference between revisions of "PTZ/Instructions/RS485"
(→New Template) |
(→New Template) |
||
| Line 15: | Line 15: | ||
3. Turn on the PTZ camera. | 3. Turn on the PTZ camera. | ||
| + | |||
| + | ==Determine PTZ's Address, Baud, & Protocol== | ||
| + | |||
| + | Method 1: Reboot and View OSD | ||
| + | 1. Connect Analog or HD-CVI PTZ to Channel 1. | ||
| + | |||
| + | 2. Bring up Channel 1 Live View | ||
| + | |||
| + | 3. Power cycle PTZ. | ||
| + | |||
| + | 4. Wait for PTZ to boot, and watch Channel 1 for PTZ Info. | ||
| + | <embedvideo service="youtube">https://www.youtube.com/watch?v=G0WaKEVi80U</embedvideo> | ||
Revision as of 17:00, 21 January 2020
Contents
RS485
Description
RS485 is a communication port which is based on coaxial cable. It can control the camera via back-end device when the information of RS485 is set in accordance with that of the back-end coding device.
Prerequisites
Instructions
New Template
1. Connect the RS485 cable of the PTZ camera to the RS485 port on the Device. Ensure the match of A and B interfaces.
2. Connect the video out cable of the PTZ camera to the video input port on the Device.
3. Turn on the PTZ camera.
Determine PTZ's Address, Baud, & Protocol
Method 1: Reboot and View OSD 1. Connect Analog or HD-CVI PTZ to Channel 1.
2. Bring up Channel 1 Live View
3. Power cycle PTZ.
4. Wait for PTZ to boot, and watch Channel 1 for PTZ Info.
