Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:SMD WebUI Old"
(→Prerequisites) |
|||
| Line 1: | Line 1: | ||
==Prerequisites== | ==Prerequisites== | ||
| + | * Dahua device that supports SMD | ||
==Video Instructions== | ==Video Instructions== | ||
<embedvideo service="youtube">https://youtu.be/FS83lrShTh4</embedvideo> | <embedvideo service="youtube">https://youtu.be/FS83lrShTh4</embedvideo> | ||
| − | |||
== How to Setup SMD using the WebUI Old == | == How to Setup SMD using the WebUI Old == | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
Revision as of 18:17, 24 January 2020
Contents
Prerequisites
- Dahua device that supports SMD
Video Instructions
How to Setup SMD using the WebUI Old
Step by Step Instructions
Prerequisites
- WebUI Old.
1. Login.
2. Go to the "Setting" tab.
3. Go to motion detection tab, "Event"
4. Check the Enable box, choose the area and click on "Save"
5. Go the "SMD Setup" tab
6. Check the Enable box, choose the area and click on "Save"
7. Check the Enable box for either "Human" or "Motor Vehicle"
8. Check the "Save" button.
