Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

Difference between revisions of "FLIR/P2P Migration/Remote Access DDNS"

(→‎Step by Step)
Line 10: Line 10:
 
4. Access to FLIR recorder.<br>
 
4. Access to FLIR recorder.<br>
  
−
== Step by Step ==
+
== Step by Step Instruction ==
−
1. Set the DVR to DHCP and allow it to pull an address. Make note of the address used as it will be needed in later steps. Make note of the MAC address of the unit as well.
 
  
−
2. At the computer, open the command prompt by opening the start menu and typing '''CMD''' into the search and double-click on the program to run. <br>
+
Below instruction is for FLIR model: D320, D330, DNR Series, IP Camera, and MPX.
−
[[File:DDNS_Setup_2.png|200px]]
 
  
−
3. Once open, enter '''ipconfig''' and press enter. Several line will be shown, look for '''Default Gateway''' and take note of the number displayed; this will be the IP address of the router.<br>
+
1. Access your web browser, and go to http://ddns.myddns-flir.com. Click on '''Create Account'''.
−
<gallery>
 
−
File:DDNS_Setup_3.png
 
−
File:DDNS_Setup_3a.png
 
−
</gallery>
 
  
−
4. Open a browser window and in the address bar enter the address of the router; once the page loads use the router login information to login.<br>
+
2. Enter all information needed.
−
[[File:DDNS_Setup_4.png|200px]]
 
  
−
5. In this example a DHCP Reservation will be used, the alternative if this is not an option is to use a static address. Check the router to see which option is available.
+
3. You can locate device MAC address by login in to your FLIR recorder. Go to Setup > Network > TCP/IP. You must replace the ''':''' with '''-''' when entering MAC address on DDNS submission.
  
−
6. Under the DHCP Reservation option add a new device and set the name to easily identify it. Manually add a device and enter the IP of the system as well as the MAC address associated with the device and save the changes.
+
4. Click '''Create New Account'''.
−
<gallery>
 
−
File:DDNS_Setup_6.png
 
−
File:DDNS_Setup_6a.png
 
−
</gallery>
 
−
7. Once changes have been saved, confirm that the DVR can be reached at the address given.  
 
  
−
8. At the router, locate the port forwarding option ports will be required to be opened in order to access the system with the DDNS. The required ports for remote access are the HTTP and TCP ports. The defaults are 80 and 35000 respectively, check the system '''Network''' settings > '''Connection''' to confirm port values.<br>
+
5. You will see a URL when Domain Name is successfully created. You will also receive email notification with your username.
−
[[File:DDNS_Setup_8.png|200px]]
 
−
<!-- Add image for the Connection Section from FLIR NVR/DVR -->
 
  
−
9. When setting up the port forwarding, the required ports will need to be forwarded to the IP address of the DVR. The protocol should be set up for both UDP and TCP protocols.<br>
+
6. Access the NVR DDNS setup page. Click check-mark for Enable.
−
[[File:DDNS_Setup_9.png|200px]]
 
  
−
10. Once port forwarding has been set up, check the port status using yougetsignal.com an open port means the forwarding is working. Confirm all ports working before proceeding.<br>
+
7. Enter the domain name, User ID, and Password.  
−
<gallery>
 
−
File:DDNS_Setup_10.png
 
−
File:DDNS_Setup_10a.png
 
−
</gallery>
 
  
−
11. Login to the Lorex Account to be used for the DDNS set up. Go to the DDNS tab to set up the DDNS. Fill in the required information and hit '''Add Device''' to save the set up. The information for your DDNS will be displayed afterwards.
+
8. Click OK.
−
<gallery>
 
−
File:DDNS_Setup_11.png
 
−
File:DDNS_Setup_11a.png
 
−
File:DDNS_Setup_11b.png
 
−
</gallery>
 
−
12. Now, at the DVR, under Setup > Network > DDNS enter the information provided for the DDNS. <br>
 
−
[[File:DDNS_Setup_12.png|200px]]
 
  
−
13. The unit should now be available under the new DDNS address.<br>
+
9. Your DDNS is now setup for your FLIR Recorder.
−
[[File:DDNS_Setup_13.png|200px]]
+
 
 +
For instruction on how to add FLIR device to your mobile app using DDNS, please click here.

Revision as of 22:21, 4 February 2020

Remote Access: DDNS Set up

Description

In this example we will be setting up a FLIR DVR/NVR with DDNS service for Remote Access.

Prerequisites

1. A Windows PC.
2. Internet Access.
3. Ports are forwarded. Click here for How to do Port Forwarding
4. Access to FLIR recorder.

Step by Step Instruction

Below instruction is for FLIR model: D320, D330, DNR Series, IP Camera, and MPX.

1. Access your web browser, and go to http://ddns.myddns-flir.com. Click on Create Account.

2. Enter all information needed.

3. You can locate device MAC address by login in to your FLIR recorder. Go to Setup > Network > TCP/IP. You must replace the : with - when entering MAC address on DDNS submission.

4. Click Create New Account.

5. You will see a URL when Domain Name is successfully created. You will also receive email notification with your username.

6. Access the NVR DDNS setup page. Click check-mark for Enable.

7. Enter the domain name, User ID, and Password.

8. Click OK.

9. Your DDNS is now setup for your FLIR Recorder.

For instruction on how to add FLIR device to your mobile app using DDNS, please click here.

Retrieved from "https://DahuaWiki.com/index.php?title=FLIR/P2P_Migration/Remote_Access_DDNS&oldid=54282"