Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:Alarm Out WebUI Old"
| Line 4: | Line 4: | ||
<embedvideo service="youtube">https://youtu.be/8qua-4gi9XE</embedvideo> | <embedvideo service="youtube">https://youtu.be/8qua-4gi9XE</embedvideo> | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
| − | 1. | + | 1. Login to the camera's WEBUI |
[[File:Alarm OutOWUI-1.png|700px]] | [[File:Alarm OutOWUI-1.png|700px]] | ||
| − | 2. | + | 2. Go to Setup>Event>Alarm Output and select the relay the buzzer is wired too. Hit OK to save. |
[[File:Alarm OutOWUI-2.png|700px]] | [[File:Alarm OutOWUI-2.png|700px]] | ||
| − | 3. | + | 3. Go to Video Detection on the left menu. Enable Motion Detection, Alarm Out (With the corresponding relay), and hit okay to save |
[[File:Alarm OutOWUI-3.png|700px]] | [[File:Alarm OutOWUI-3.png|700px]] | ||
Latest revision as of 15:59, 6 February 2020
Prerequisites
Video Instructions
Step by Step Instructions
1. Login to the camera's WEBUI
2. Go to Setup>Event>Alarm Output and select the relay the buzzer is wired too. Hit OK to save.
3. Go to Video Detection on the left menu. Enable Motion Detection, Alarm Out (With the corresponding relay), and hit okay to save
