Difference between revisions of "Template:Alarm Out WebUI New"

(Created page with " ==Prerequisites== ==Video Instructions== <embedvideo service="youtube">https://youtu.be/B16DvtUxhHw</embedvideo> ==Step by Step Instructions==")
 
Line 4: Line 4:
 
<embedvideo service="youtube">https://youtu.be/B16DvtUxhHw</embedvideo>
 
<embedvideo service="youtube">https://youtu.be/B16DvtUxhHw</embedvideo>
 
==Step by Step Instructions==
 
==Step by Step Instructions==
 +
1. Login to the WEBUI
 +
 +
[[File:Alarm OutNWUI-1.png|700px]]
 +
 +
2. Go to Alarm
 +
 +
[[File:Alarm OutNWUI-1.png|700px]]
 +
 +
3. Select Alarm Output on the left menu and enable the relay the buzzer is wired to
 +
 +
[[File:Alarm OutNWUI-1.png|700px]]
 +
 +
4. Select Video detection on the left menu. Enable Motion Detection and go to Alarm Out settings.
 +
 +
[[File:Alarm OutNWUI-1.png|700px]]
 +
 +
5. Check the General Alarm box and select the relay to enable. Click on OK
 +
 +
[[File:Alarm OutNWUI-1.png|700px]]
 +
 +
6. Click on OK to save and finalize the settings
 +
 +
[[File:Alarm OutNWUI-1.png|700px]]

Revision as of 17:51, 6 February 2020

Prerequisites

Video Instructions

Step by Step Instructions

1. Login to the WEBUI

Alarm OutNWUI-1.png

2. Go to Alarm

Alarm OutNWUI-1.png

3. Select Alarm Output on the left menu and enable the relay the buzzer is wired to

Alarm OutNWUI-1.png

4. Select Video detection on the left menu. Enable Motion Detection and go to Alarm Out settings.

Alarm OutNWUI-1.png

5. Check the General Alarm box and select the relay to enable. Click on OK

Alarm OutNWUI-1.png

6. Click on OK to save and finalize the settings

Alarm OutNWUI-1.png