Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "DDNS/NoIP DDNS Setup"
| Line 16: | Line 16: | ||
| − | Step 4. Input a host name of your choice > Select Add "Host Name" | + | Step 4. Input a host name of your choice > Select Add "Host Name" |
[[File:no_ip_5.png|500px]] | [[File:no_ip_5.png|500px]] | ||
Step 5. Login into Recorder via Web Service or Physical recorder. From the Main Menu select the network tab > Select DDNS on the left hand side. Check off "Enable" > Click on Drop down to select "No-IP" | Step 5. Login into Recorder via Web Service or Physical recorder. From the Main Menu select the network tab > Select DDNS on the left hand side. Check off "Enable" > Click on Drop down to select "No-IP" | ||
| + | |||
| + | [[File:no_ip_8.png|500px]] | ||
| + | |||
| + | |||
| + | Step 6. Input host IP > Domain Name > User Name > Password | ||
[[File:no_ip_8.png|500px]] | [[File:no_ip_8.png|500px]] | ||
Revision as of 22:04, 17 February 2016
Step 1. Go to https://www.noip.com/
Step 2. Create an account. Go to your email you registered with noip.com. An email activation will be sent to activate account.
Step 3. Once account is activated select "Create Host Name Now"
Step 4. Input a host name of your choice > Select Add "Host Name"
Step 5. Login into Recorder via Web Service or Physical recorder. From the Main Menu select the network tab > Select DDNS on the left hand side. Check off "Enable" > Click on Drop down to select "No-IP"
Step 6. Input host IP > Domain Name > User Name > Password
