Difference between revisions of "USA/HDCVI/Camera/PTZ/Pro/49225IC"
(→Specifications) |
(→Note:) |
||
| Line 24: | Line 24: | ||
| − | ==Note:== | + | ====Note:==== |
- To avoid any issues with performance do not use baluns when connecting a PTZ camera. | - To avoid any issues with performance do not use baluns when connecting a PTZ camera. | ||
Revision as of 15:56, 14 April 2020
49225IC
Features
- 1/2.8-in. 2 MP STARVIS™ CMOS Sensor
- Powerful 25x Optical Zoom
- Starlight Technology for Ultra-low Light Sensitivity
- 1080p at 30 fps, 720p at 60 fps Maximum Resolution
- Maximum IR Distance up to 100 m (328 ft)
- IP66 Ingress Protection
- Designed for Extreme Temperature Environments
- Five-year Warranty (applies to products sold through an authorized Dahua Dealer.)
Compatible Accessories
Note:
- To avoid any issues with performance do not use baluns when connecting a PTZ camera.
Specifications
| Camera | |
| Image Sensor | 1/2.8 in. STARVIS™ CMOS |
| Effective Pixels | 1920(H) x 1080(V), 2 MP |
| Scanning System | Progressive |
| Electronic Shutter Speed | 1/3 s to 1/300,000 s |
| Minimum Illumination | Color: 0.005 lux at F1.6; |
| 0 lux at F1.6 with IR on | |
| S/N Ratio | More than 50 dB |
| IR Distance | Distance up to 100.0 m (328.08 ft) |
| IR On/Off Control | Auto, Manual |
| IR LEDs | Six (6) |
| Lens | |
| Focal Length | 4.8 mm to 120 mm |
| Maximum Aperture | F1.6 to F4.4 |
| Horizontal Angle of View | Horizontal: 59.2° to 2.4° |
| Optical Zoom | 25x |
| Focus Control | Auto, Manual |
| Close Focus Distance | 100 mm to 1000 mm |
| DORI Distance1 | |
| Detect (8 ppf): 1613 m (5292 ft) | |
| Observe (19 ppf): 646 m (2119 ft) | |
| Recognize (38 ppf): 323 m (1060 ft) | |
| Identify (76 ppf): 161 m (528 ft) | |
| PTZ | |
| Pan/Tilt Range | Pan: 0° to 360° endless |
| Tilt: -15° to 90° | |
| Auto Flip 180° | |
| Manual Control Speed | Pan: 0.1° to 200° /s |
| Tilt: 0.1° to 120° /s | |
| Preset Speed | Pan: 240° /s |
| Tilt: 200° /s | |
| Presets | 300 |
| PTZ Mode | 5 Pattern, 8 Tour, Auto Pan, Auto Scan |
| Speed Setup | Human-oriented Focal Length and Speed Adaptation |
| Power up Action | Auto restore to previous PTZ and lens status after power failure |
| Idle Motion | Activate Preset, Scan, Tour, Pattern if there is no command in the specified period |
| Protocol | DH-SD, Pelco-P/D (Auto recognition) |
| Video | |
| Resolution | 1080p (1920 × 1080) |
| 720p (1280 × 720) | |
| Frame Rate | 1080p at 30 fps or 720p at 30/60 fps |
| Video Output | One (1) Channel, BNC High-definition Video Output (HDCVI, AHD, TVI) or CVBS Standard Definition Video Output (switchable) |
| Video Transmission2 | |
| RG-59/U Coax | 720p: 500 m (1640.42 ft) 1080p: 400 m (1312.34 ft) |
| RG-6/U Coax | 720p: 800 m (2624.67 ft) 1080p: 600 m (1968.50 ft) |
| CAT 6 UTP (balun required) | 720p: 380 m (1246.72 ft) 1080p: 380 m (1246.72 ft) |
| Day/Night | Auto (ICR), Color, B/W |
| OSD Menu | English, French, German, Italian, Japanese, Polish, Portuguese, Russian, Spanish |
| Advanced Features | BLC, HLC, WDR (120 dB) |
| Backlight Compensation | Auto, ATW, Indoor, Outdoor, Manual |
| White Balance | Auto, Manual |
| Gain Control | Ultra DNR (2D/3D) |
| Noise Reduction | Defog |
| Digital Zoom | 16x |
| Flip | 180° |
| Privacy Masking | Up to 24 areas |
| Certifications | |
| CE | EN 55032 |
| EN 55024 | |
| EN 50130-4 | |
| UL | UL60950-1 + CAN/CSA C22.2, No.60950-1 |
| Electromagnetic Compatibility (EMC) | FCC Part 15 Subpart B |
| ANSI C63.4-2014 | |
| Interface | |
| Video Output | Output: One (1) BNC |
| Audio Input | Input: One (1) Channel |
| RS485 | One (1) Port |
| Alarm | Input: Two (2) Channels |
| Output: One (1) Channel | |
| Electrical | |
| Power Supply | 12 VDC, 3 A |
| Power Consumption | 13 W, 20 W with IR on |
| Environmental | |
| Operating Conditions | -40° C to 70° C (-40° F to +158° F), |
| with built-in heater, Less than 90% RH | |
| Ingress Protection | IP66 |
| Construction | |
| Casing | Metal |
| Dimensions | 160.0 mm x 295.0 mm (6.30 in. x 11.61 in.) |
| Net Weight | 4.0 kg (8.82 lb) |
| Gross Weight | 4.20 kg (9.26 lb) |
| 1. The DORI distance is a measure of the general proximity for a specific classification to help pinpoint the right camera for your needs. The DORI distance is calculated based on sensor specifications and lab test results according to EN 62676-4, the standard that defines the criteria for the Detect, Observe, Recognize and Identify classifications. 2. Transmission distance results verified by real-scene testing in Dahua's test laboratory. Actual transmission distances may vary due to external influences, cable quality, and wiring structures. | |
