Difference between revisions of "IPCWebInterface"

Parameter

Function

Main stream

Streaming media protocol connection, under main stream config, monitor video or not. Generally for storage and monitor.  

Sub (Extra) stream 1

Streaming media protocol connection, under sub stream 1 config, monitor video or not. When network bandwidth is insufficient, it substitutes main stream for monitoring.

Sub (Extra) stream 2

Streaming media protocol connection, under sub stream 2 config, monitor video or not. When network bandwidth is insufficient, it substitutes main stream for monitoring.

Protocol

You can select stream media protocol from the dropdown list.

There are three options: TCP/UDP/Multicast

SN

Parameter

Function

1

Alarm output

It shows if there is any alarm output, status description is as follows:

• Red: means there is alarm output.
• Grey: means alarm is over.

Click on the button to force alarm to be on or off.

2

Zoom in

• When the video is in the original status, click it you can select any zone to zoom in. In the non-original status, you can drag the zoom-in zone in specified range. Right click mouse to restore previous status.
• Click it; you can use the middle button of the mouse to zoom in/out the video size.

3

Snapshot

Click on the button to snapshot, save picture to path in Ch 5.1.2.5.

4

Triple snap

Click it, system can snap at 1f/s. All images are saved to path in Ch 5.1.2.5.

5

Record

Click it, system can record. All images are saved to path in Ch 5.1.2.5.

6

Easy focus

Click it, you can see there are two parameters on the preview video：AF Peak and AF Max.

AF Peak: It is to display the video definition during the focus process.

AF Max: It is the most suitable value for the video definition.

The close the AF Peak and AF Max is, the better the focus effect is.

7

Audio output

Turn on or off audio when you are monitoring.

8

Bidirectional talk

Click it to start or end bidirectional talk.

9

Help

Click it to open help file.