Revision as of 17:38, 16 June 2020

DHI-ASI7213X-T1: WebUI

Alarm Linkage

Name	Description
Alarm Input	You cannot modify the value. Keep it default.
Name	Enter a zone name.
Alarm Input Type	There are two options: NO and NC. If alarm input type of the alarm device you purchased is NO, then you should select NO; otherwise you should select NC.
Fire Link Enable	If fire link is enabled the access controller will output alarms when fire alarms are triggered. The alarm details will be displayed in the alarm log. Alarm output and access link are NO by default if fire link is enabled.
Alarm Output Enable	The relay can output alarm information (will be sent to the management platform) if the Alarm Output is enabled.
Duration (Sec.)	The alarm duration, and the range is 1–300 seconds.
Alarm Output Channel	You can select an alarm output channel according to the alarming device that you have installed. Each alarm device can be regarded as a channel.
Access Link Enable	After the Access Link is enabled, the access controller will be normally on or normally closed when there are input alarm signals.
Channel Type	There are two options: NO and NC.

Data Capacity

Video Setting

Face Detect

Network Setting

Safety Mgmt

User Mgmt

Maintenance

Config Mgmt

Upgrade

Version Info

Online User

System Log

@@ Line 2: / Line 2: @@
 {| class="wikitable" style="color:#dbdbdd; background-color:#4c4b57;"
 |-
-|[[file:Kiosk_Alarm_Linkage_Icon.png]]Alarm Linkage
+|{{Template:Kiosk_WebUI_Alarm_Linkage}}
 |-
 |[[file:Kiosk_Data_Capacity_Icon.png]]Data Capacity