Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"
(→Contact 2) |
|||
Line 1: | Line 1: | ||
=Alarm Input and Output= | =Alarm Input and Output= | ||
+ | [[file:DHI-ASI7213X-T1_Cable_Connections.png|thumb|Cable Connections]] | ||
==Cable Connections== | ==Cable Connections== | ||
*Alarm1 = Normal | *Alarm1 = Normal |
Revision as of 17:26, 18 June 2020
Contents
Alarm Input and Output
Cable Connections
- Alarm1 = Normal
- Alarm2 = High Temp
- No alert for mask or face detection currently.
Contact 1
Port | Cable Color | Cable Name | Description |
---|---|---|---|
CON1 | |||
Black | RD– | Negative electrode of external card reader. | |
Red | RD+ | Positive electrode of external card reader. | |
Blue | CASE | Tamper alarm input of the external card reader. | |
White | D1 | Wiegand D1 input (connected to external card reader)/output (connected to controller). | |
Green | D0 | Wiegand D0 input (connected to external card reader)/output (connected to controller). | |
Brown | LED | Connected to external reader indicator in | |
Yellow | B | RS-485 negative electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
| |
Purple | A | RS-485 positive electrode input (connected to external card reader)/output (connected to controller, or connected to door control security module).
|
Contact 2
Port | Cable Color | Cable Name | Description |
---|---|---|---|
CON2 | |||
White and red | ALARM1_NO | Alarm 1 normally open output port | |
White and orange | ALARM1_COM | Alarm 1 common output port. | |
White and blue | ALARM2_NO | Alarm 2 normally open output port. | |
White and gray | ALARM2_COM | Alarm 2 common output port. | |
White and green | GND | Connected to the common GND port. | |
White Brown | ALARM1 | Alarm 1 input port. | |
White and yellow | GND | Connected to the common GND port. | |
White and purple | ALARM2 | Alarm 2 input port. |
Contact 3
Port | Cable Color | Cable Name | Description |
---|---|---|---|
CON3 | |||
Black and red | RX | RS-232 receiving port. | |
Black and orange | TX | RS-232 sending port. | |
Black and blue | GND | Connected to the common GND port. | |
Black and gray | SR1 | Used for door contact detection. | |
Black and green | PUSH1 | Door open button of door No.1 | |
Black and brown | DOOR1_COM | Lock control common port. | |
Black and yellow | DOOR1_NO | Lock control normally open port. | |
Black and purple | DOOR1_NC | Lock control normally closed port. |