Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"
(→High Body Temperature Indication Light) |
(→Door Strike and Door Release Button Physical Setup) |
||
Line 278: | Line 278: | ||
==Door Strike and Door Release Button Physical Setup== | ==Door Strike and Door Release Button Physical Setup== | ||
+ | {| class="wikitable" | ||
+ | !|Port | ||
+ | !colspan="2"|Cable Color | ||
+ | !|Cable Name | ||
+ | !|Description | ||
+ | |- | ||
+ | |+CON3 | ||
+ | |- | ||
+ | |rowspan="9"|CON3 | ||
+ | |- | ||
+ | |Black and red | ||
+ | |[[File:Wire_black_red_stripe.svg|35px]] | ||
+ | |RX | ||
+ | |RS-232 receiving port. | ||
+ | |- | ||
+ | |Black and orange | ||
+ | |[[File:Wire_black_orange_stripe.svg|35px]] | ||
+ | |TX | ||
+ | |RS-232 sending port. | ||
+ | |- | ||
+ | |Black and blue | ||
+ | |[[File:Wire_black_blue_stripe.svg|35px]] | ||
+ | |GND | ||
+ | |Connected to the common GND port. | ||
+ | |- | ||
+ | |Black and gray | ||
+ | |[[File:Wire_black_gray_stripe.svg|35px]] | ||
+ | |SR1 | ||
+ | |Used for door contact detection. | ||
+ | |- | ||
+ | |Black and green | ||
+ | |[[File:Wire_black_green_stripe.svg|35px]] | ||
+ | |PUSH1 | ||
+ | |Door open button of door No.1 | ||
+ | |- | ||
+ | |Black and brown | ||
+ | |[[File:Wire_black_brown_stripe.svg|35px]] | ||
+ | |DOOR1_COM | ||
+ | |Lock control common port. | ||
+ | |- | ||
+ | |Black and yellow | ||
+ | |[[File:Wire_black_yellow_stripe.svg|35px]] | ||
+ | |DOOR1_NO | ||
+ | |Lock control normally open port. | ||
+ | |- | ||
+ | |Black and purple | ||
+ | |[[File:Wire_black_purple_stripe.png|35px]] | ||
+ | |DOOR1_NC | ||
+ | |Lock control normally closed port. | ||
+ | |} |
Revision as of 15:24, 19 June 2020
Contents
Alarm Input and Output
Web Interface
Cable Connections
- Alarm1 = Normal
- Alarm2 = High Temp
- No alert for mask or face detection currently.