Difference between revisions of "Thermal/DHI-ASI7213X-T1/Instructions/Alarm Input and Output"
(→Door Strike and Door Release Button Physical Setup) |
(→Door Release Button Physical Setup) |
||
Line 279: | Line 279: | ||
|- | |- | ||
|rowspan="9"|CON3 | |rowspan="9"|CON3 | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
|Black and blue | |Black and blue | ||
Line 294: | Line 284: | ||
|GND | |GND | ||
|Connected to the common GND port. | |Connected to the common GND port. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
|Black and green | |Black and green | ||
Line 305: | Line 290: | ||
|Door open button of door No.1 | |Door open button of door No.1 | ||
|- | |- | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} |
Revision as of 15:38, 19 June 2020
Contents
Alarm Input and Output
Web Interface
Cable Connections
- Alarm1 = Normal
- Alarm2 = High Temp
- No alert for mask or face detection currently.
Contact 1
Contact 2
Contact 3
Normal Body Temperature Indication Light
Port | Cable Color | Cable Name | Description | |
---|---|---|---|---|
CON2 | ||||
White and red | ALARM1_NO | Alarm 1 normally open output port | ||
White and orange | ALARM1_COM | Alarm 1 common output port. |
High Body Temperature Indication Light
Port | Cable Color | Cable Name | Description | |
---|---|---|---|---|
CON2 | ||||
White and blue | ALARM2_NO | Alarm 2 normally open output port. | ||
White and gray | ALARM2_COM | Alarm 2 common output port. |
Door Strike Physical Setup
Door Release Button Physical Setup
Port | Cable Color | Cable Name | Description | |
---|---|---|---|---|
CON3 | ||||
Black and blue | GND | Connected to the common GND port. | ||
Black and green | PUSH1 | Door open button of door No.1 |