Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of ":People Flow Control/Enable and Use Flow Control"
(→Step by Step Instructions) |
|||
Line 12: | Line 12: | ||
<embedvideo service="youtube">https://youtu.be/T2Ot1DCK3HU</embedvideo> | <embedvideo service="youtube">https://youtu.be/T2Ot1DCK3HU</embedvideo> | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
+ | 1. From Live View | ||
+ | |||
+ | Right click select Flow Mode | ||
[[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_1.jpg|800px]] | [[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_1.jpg|800px]] | ||
+ | |||
+ | 2. The NVR will display a full screen of statistics for People Flow Control | ||
[[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_2.jpg|800px]] | [[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_2.jpg|800px]] | ||
+ | |||
+ | |||
+ | People flow panels can only be closed by click the close button at the top-right corner. | ||
+ | |||
+ | [[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_Close.jpg|800px]] | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | Enter Event triggered: | ||
[[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_3.jpg|800px]] | [[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_3.jpg|800px]] | ||
+ | |||
+ | Counter updated live at Monitor | ||
[[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_4.jpg|800px]] | [[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_4.jpg|800px]] | ||
+ | |||
+ | Exit event triggered | ||
[[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_5.jpg|800px]] | [[File:IVS_-_People_Flow_Control-_Enable_and_Use_-_5.jpg|800px]] |
Revision as of 22:48, 24 June 2020
Contents
Enable and Use People Flow Control
Description
People Flow Control allows for Live display of People Flow Control statistics on a monitor attached directly to the NVR.
These instructions will show how to enable and use the People Flow Control feature - Flow Mode
Prerequisites
- People Flow Control instructions followed
- Local monitor attached to NVR
Video Instructions
Enable and Use Flow Control: SystemUI
Step by Step Instructions
1. From Live View
Right click select Flow Mode
2. The NVR will display a full screen of statistics for People Flow Control
People flow panels can only be closed by click the close button at the top-right corner.
Enter Event triggered:
Counter updated live at Monitor
Exit event triggered