Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:IgDMSS/Instructions/Add DB11"
(Created page with "==Step by Step Instructions== 1. Open iDMSS or gDMSS then scan the QR code on the DB11.<br> 400x400px 2. If the iDMSS or gDMSS are not logged, it...") |
(No difference)
|
Revision as of 21:35, 11 August 2020
Step by Step Instructions
1. Open iDMSS or gDMSS then scan the QR code on the DB11.
2. If the iDMSS or gDMSS are not logged, it is required to do so before proceeding to adding the device.
3. Follow the on-screen instructions and wait for the status light before pressing button located on the back of the DB11 device. After the device is pressed, a vocal message will be heard.
4. When a prompt comes up, press "Join" to continue.
6. Choose the WIFI network the DB11 will be connecting to.
7. Follow the on-screen instructions to continue with the setup.
8. Enter the user-defined Device Name. In the example, we use "DB11".
9. Finalize the settings to complete the setup.
10. Go to "Me"
11. Make sure that the Notification Switch is enabled and now you should receive a call notification when doorbell button is pushed.