Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Template:DMSS/Instructions/Add DB11"
(Created page with "==Step by Step Instructions== 1. Open DMSS then go to '''Me''' menu. If the DMSS are not logged, it is required to do so before proceeding to adding the device. File:DMSS_L...") |
(No difference)
|
Revision as of 22:12, 11 August 2020
Step by Step Instructions
1. Open DMSS then go to Me menu. If the DMSS are not logged, it is required to do so before proceeding to adding the device.
2.Tap on Home, and tap on + button on the top right hand corner, then choose SN/Scan.
3. Scan the QR code of the device that located on the back of the doorbell.
4. Make sure your device is connected to the power and the indicator light flashes blue. Tap on Next.
5. When a prompt comes up, Tap onJoin to continue.
6. Setup the device password.
7. Choose the WIFI network the DB11 will be connecting to.
7. Enter Wifi password and tap on Next to continue the setup.
8. Enter the user-defined Device Name. In the example, we use Dahua Doorbell.
9. Finalize the settings to complete the setup.
10. Select either Electronic Chime if you are using an Electronic door chime or Mechanical Chime if you are using a Mechanical door chime. Then tap on Save on the bottom.
11. Go to Me > General. Make sure that the Notification Switch is enabled and now you should receive a call notification when doorbell button is pushed.