Difference between revisions of "Alarm Config Settings"
| Line 14: | Line 14: | ||
|- | |- | ||
| Alarm Out | | Alarm Out | ||
| − | | style="font-size:small; font-weight:normal;" | Sets alarm outputs that will be activate when this alarm is triggered | + | | style="font-size:small; font-weight:normal;" | Sets alarm outputs that will be activate when this alarm is triggered [[Record/Basic/Alarm_Out|> How To Setup Alarm Output]] |
|- | |- | ||
| Record Channel | | Record Channel | ||
Revision as of 20:38, 29 October 2020
Description
Alarms of various types can be setup and configured to respond in different ways when triggered.
| Setting | Description |
|---|---|
| Period | Sets the time and days of the week this alarm can be triggered |
| Post-Record | Sets the amount of seconds that are recorded after the alarm event is done being triggered, if "Record Channel" is enabled |
| Alarm Out | Sets alarm outputs that will be activate when this alarm is triggered > How To Setup Alarm Output |
| Record Channel | Sets which channels are recorded when the alarm is triggered |
| Tour | Enables a tour when the alarm is triggered |
| PTZ Activation | Sets the behavior of a PTZ camera connected to the same recorder when the alarm is triggered |
| Buzzer | Makes the recorder emit an audible beeping noise when the alarm is triggered |
| Alarm Upload | |
| Log | Records the event information in the system log when the alarm is triggered |
| Send Email | Sends an email, via the settings set in the Email section of the Network settings on the recorder, when the alarm is triggered |
