Difference between revisions of "Alarm Config Settings"
| Line 1: | Line 1: | ||
<center> | <center> | ||
| − | Alarms of various types (such as Motion) can be setup and configured to respond in different ways when triggered. | + | Alarms of various types (such as Motion) can be setup and configured to respond in different ways when triggered. |
Configure the alarm trigger/response on the same interface where the Alarm is setup: | Configure the alarm trigger/response on the same interface where the Alarm is setup: | ||
| + | |||
| + | If the desired output/trigger is not listed it is possible your product does not support it, please '''Confirm via the Specification Sheet''' for the device | ||
[[File:Alarm_Trigger_menu_SystemUI.jpg|500px]] | [[File:Alarm_Trigger_menu_SystemUI.jpg|500px]] | ||
Revision as of 16:05, 30 October 2020
Alarms of various types (such as Motion) can be setup and configured to respond in different ways when triggered.
Configure the alarm trigger/response on the same interface where the Alarm is setup:
If the desired output/trigger is not listed it is possible your product does not support it, please Confirm via the Specification Sheet for the device
The settings are explained below:
| Setting | Description |
|---|---|
| Period | Sets the time and days of the week this alarm can be triggered |
| Post-Record | Sets the amount of seconds that are recorded after the alarm event is done being triggered, if "Record Channel" is enabled |
| Alarm Out | Sets alarm outputs that will be activate when this alarm is triggered > How To Set Up Alarm Output |
| Record Channel | Sets which channels are recorded when the alarm is triggered |
| Tour | Enables a tour when the alarm is triggered |
| PTZ Activation | Sets the behavior of a PTZ camera connected to the same recorder when the alarm is triggered > How To Set Up PTZ Activation |
| Buzzer | Makes the recorder emit an audible beeping noise when the alarm is triggered |
| Alarm Upload | |
| Log | Records the event information in the system log when the alarm is triggered |
| Send Email | Sends an email, via the settings set in the Email section of the Network settings on the recorder, when the alarm is triggered > How To Set Up Email Notifications |
