Difference between revisions of "Template:DMSS/Instructions/LincX2PRO PIR Setup"
(Created page with "==Step by Step Instructions== 1. From the home screen select Device 400px 2. Select the device from the list F...") |
(No difference)
|
Revision as of 20:41, 30 November 2020
Step by Step Instructions
1. From the home screen select Device
2. Select the device from the list
3. Select Floodlight
4. Select PIR Region
5. Tap a Zone to disable/enable
6. Use the slide to adjust the range of the Zones
7. Press the Save icon in the top right to save settings
