Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Video Intercom/SIP 2.0/How To Add VTO4202 To DSSPro Via Configtool"
Line 5: | Line 5: | ||
==Pre-requisites== | ==Pre-requisites== | ||
− | Initialized VDP Devices. Follow our guide [[Video_Intercom/SIP_2.0/How_To_Initialize_Video_Intercom_Using_Configtool|here]] before continuing | + | * Initialized VDP Devices. Follow our guide [[Video_Intercom/SIP_2.0/How_To_Initialize_Video_Intercom_Using_Configtool| here]] before continuing |
− | + | * [https://dahuawiki.com/DSS/DSS_Pro| DSS Pro] | |
− | + | * [https://dahuawiki.com/images/Files/Software/ConfigTool/General_ConfigTool_ChnEng_V5.000.0000001.7.R.20210227.zip| Configtool] | |
==Video Instructions== | ==Video Instructions== | ||
==Step by Step Instructions== | ==Step by Step Instructions== | ||
+ | |||
+ | 1. |
Revision as of 16:59, 5 May 2021
Contents
How To Add VTO4202 To DSSPro Via Configtool
Description
This article will go over DHI-VTO4202F setup to DSS Pro using Configtool
Pre-requisites
- Initialized VDP Devices. Follow our guide here before continuing
- DSS Pro
- Configtool
Video Instructions
Step by Step Instructions
1.