Difference between revisions of "Traffic/ITC431-RW1F-IRL8 Initial Setup"
(Created page with "=How to Configure ITC431-RW1F-IRL8 via WebGUI= ==Introduction== This guide will demonstrate how to configure the settings for the license plate camera via web interface. ==Pr...") |
|||
Line 19: | Line 19: | ||
[[File:2._Navigate_to_ANPR_Settings.png|400px]] | [[File:2._Navigate_to_ANPR_Settings.png|400px]] | ||
− | 3. Remove all the drawing rules for 3 lans listed on the right side | + | 3. Remove all the drawing rules for 3 lans listed on the right side<br> |
− | - Select the first lane (It should be already selected by default). | + | - Select the first lane (It should be already selected by default).<br> |
− | - Click on the corresponding circle arrows for each color to remove them. | + | - Click on the corresponding circle arrows for each color to remove them.<br> |
- Perform the same process for the other 2 lanes to remove all remaining drawings. | - Perform the same process for the other 2 lanes to remove all remaining drawings. | ||
Line 30: | Line 30: | ||
[[File:4._Rules_Removed_and_Lane_2_And_3_Disabled.png|400px]] | [[File:4._Rules_Removed_and_Lane_2_And_3_Disabled.png|400px]] | ||
− | 5. Select #1 again if it isn't already. Click on the 3 specified color options to proceed with the new drawing rules (green, blue and red) | + | 5. Select #1 again if it isn't already. Click on the 3 specified color options to proceed with the new drawing rules (green, blue and red)<br> |
− | Green is the detection box. | + | <span style=color:green;font-style:italic;font-weight:bold>Green</span> is the detection box.<br> |
− | Blue is the lane where cars will be coming in/out. | + | <span style=color:blue;font-style:italic;font-weight:bold>Blue</span> is the lane where cars will be coming in/out.<br> |
− | Red is the detect line or snapline where the snapshot will be taken after the cars go passed it. | + | <span style=color:red;font-style:italic;font-weight:bold>Red</span> is the detect line or snapline where the snapshot will be taken after the cars go passed it. |
[[File:5._Selecting_Corresponding_Color_And_Draw_Each_Rule.png|400px]] | [[File:5._Selecting_Corresponding_Color_And_Draw_Each_Rule.png|400px]] |
Revision as of 18:51, 16 November 2021
Contents
How to Configure ITC431-RW1F-IRL8 via WebGUI
Introduction
This guide will demonstrate how to configure the settings for the license plate camera via web interface.
Prerequisites
1. License plate camera initialized and on the network.
How-to Video
coming soon
Step by Step Instructions
1. Leave these settings on default and confirm it.
2. Go to Setting > Event > ANPR Snap
3. Remove all the drawing rules for 3 lans listed on the right side
- Select the first lane (It should be already selected by default).
- Click on the corresponding circle arrows for each color to remove them.
- Perform the same process for the other 2 lanes to remove all remaining drawings.
4. After the drawing rules are removed, we will need to disable number 2 and 3 by deselecting the checkboxes.
5. Select #1 again if it isn't already. Click on the 3 specified color options to proceed with the new drawing rules (green, blue and red)
Green is the detection box.
Blue is the lane where cars will be coming in/out.
Red is the detect line or snapline where the snapshot will be taken after the cars go passed it.
6. Navigate back to "Live" and enabled "ANPR Receive" to display the capture the license plates via webGUI.