Difference between revisions of "Access Control/Products/DHI-ASC3202B"

Line 21: Line 21:
 
! colspan=2|FAQs
 
! colspan=2|FAQs
 
|-
 
|-
|Q: Why are my mifare cards being read as Decimal?
+
|Q: Why are my Mifare cards being read as decimal?
 
|A: By default the controller will have the card no system set to decimal. In order to change the setting you will need to disable HID support then go to '''Person Management > Card No. System > Select Hexdecimal'''
 
|A: By default the controller will have the card no system set to decimal. In order to change the setting you will need to disable HID support then go to '''Person Management > Card No. System > Select Hexdecimal'''
 
|}
 
|}

Revision as of 17:35, 22 March 2023

DHI-ASC3202B

DHI-ASC3202B
Specifications Quick Start Guide Manual Firmware

Build Date: 03-06-2024
DHI-ASC3202B.png
FAQs
Q: Why are my Mifare cards being read as decimal? A: By default the controller will have the card no system set to decimal. In order to change the setting you will need to disable HID support then go to Person Management > Card No. System > Select Hexdecimal