Difference between revisions of "Template:DMSS/Instructions/LincX2PRO PIR Setup"

Line 22: Line 22:
 
[[File:LincX2ProPIRFloodlight5.png|400px]]
 
[[File:LincX2ProPIRFloodlight5.png|400px]]
  
6. Set the '''Select Mode''' to '''PIR'''
+
6. Select '''Brightness'''
 
 
[[File:LincX2ProPIRFloodlight4.png|400px]]
 
 
 
7. Select '''Brightness'''
 
  
 
[[File:LincX2ProPIRFloodlight6.png|400px]]
 
[[File:LincX2ProPIRFloodlight6.png|400px]]
  
8. Adjust the slider under '''Brightness Settings''' to the desired brightness level for the floodlight.
+
7. Adjust the slider under '''Brightness Settings''' to the desired brightness level for the floodlight.
 
<br>When you are done, select '''Save''' at the top
 
<br>When you are done, select '''Save''' at the top
  
 
[[File:LincX2ProPIRFloodlight7.png|400px]]
 
[[File:LincX2ProPIRFloodlight7.png|400px]]
  
9. Select '''Color Temperature'''
+
8. Select '''Color Temperature'''
  
 
[[File:LincX2ProPIRFloodlight8.png|400px]]
 
[[File:LincX2ProPIRFloodlight8.png|400px]]
  
10. Select '''Cool''' if you want a blue-ish color for the light or select '''Warm''' if you want a yellow-ish color for the light
+
9. Select '''Cool''' if you want a blue-ish color for the light or select '''Warm''' if you want a yellow-ish color for the light
  
 
[[File:LincX2ProPIRFloodlight9.png|400px]]
 
[[File:LincX2ProPIRFloodlight9.png|400px]]
  
11. Select '''PIR Region'''
+
10. Select '''PIR Region'''
  
 
[[File:LincX2ProPIRFloodlight10.png|400px]]
 
[[File:LincX2ProPIRFloodlight10.png|400px]]
  
12. Drag the slider on the right for the amount of distance you want the PIR to monitor. (100% = 10m [32.81 ft])
+
11. Drag the slider on the right for the amount of distance you want the PIR to monitor. (100% = 10m [32.81 ft])
 
<br>Tap the 3 zones either ON or OFF.
 
<br>Tap the 3 zones either ON or OFF.
 
<br>Select '''Save''' at the top
 
<br>Select '''Save''' at the top
Line 53: Line 49:
 
[[File:LincX2ProPIRFloodlight11.png|800px]]
 
[[File:LincX2ProPIRFloodlight11.png|800px]]
  
13. Select '''Light Duration'''
+
12. Select '''Light Duration'''
  
 
[[File:LincX2ProPIRFloodlight12.png|400px]]
 
[[File:LincX2ProPIRFloodlight12.png|400px]]
  
14. Select the duration the light will stay on once activated.
+
13. Select the duration the light will stay on once activated.
 
<br>Tap on '''OK'''
 
<br>Tap on '''OK'''
  
 
[[File:LincX2ProPIRFloodlight13.png|400px]]
 
[[File:LincX2ProPIRFloodlight13.png|400px]]

Revision as of 20:18, 8 March 2024

1. Launch the DMSS Mobile App.
Tap on Device at the bottom to access your added device list.
Select one of your added devices that you wish to setup/modify Floodlight Settings for. Tap on ... .

LincX2ProPIRFloodlight1.png

2. Select Device Details

LincX2ProPIRFloodlight2.png

3. Scroll down and select Floodlight Settings

LincX2ProPIRFloodlight3.png

4. Tap on Select Mode

LincX2ProPIRFloodlight4.png

5. Select PIR from the list.
Tap on OK

LincX2ProPIRFloodlight5.png

6. Select Brightness

LincX2ProPIRFloodlight6.png

7. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

LincX2ProPIRFloodlight7.png

8. Select Color Temperature

LincX2ProPIRFloodlight8.png

9. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellow-ish color for the light

LincX2ProPIRFloodlight9.png

10. Select PIR Region

LincX2ProPIRFloodlight10.png

11. Drag the slider on the right for the amount of distance you want the PIR to monitor. (100% = 10m [32.81 ft])
Tap the 3 zones either ON or OFF.
Select Save at the top

LincX2ProPIRFloodlight11.png

12. Select Light Duration

LincX2ProPIRFloodlight12.png

13. Select the duration the light will stay on once activated.
Tap on OK

LincX2ProPIRFloodlight13.png