Difference between revisions of "IPCSNMP"

(Created page with "===SNMP=== file:IPCSNMP.jpgThe SNMP allows the communication between the network management work station software and the proxy of the managed device. Please install the s...")
(No difference)

Revision as of 21:12, 13 October 2015

SNMP

Error creating thumbnail: Unable to save thumbnail to destination
The SNMP allows the communication between the network management work station software and the proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or establish the SNMP service before you use this function. You need to reboot the device to activate the new setup.

Parameter

Function

SNMP Version

  • Check SNMP v1, device only process v1 info.
  • Check SNMP v2, device only process v2 info.
  • Check SNMP v3, can set username, password and encryption method. Server calibrate corresponding username, password and encryption method too access device and v1/v2 are unavailable.

SNMP port

The listening port of the proxy program of the device. It is a UDP port not a TCP port. The value ranges from 1 to 65535. The default value is 161

Community

It is a string, as command between management and proxy, , defining a proxy,  and a manager’s authentication.

Read community

Read-only access to all SNMP targets, default is public.

Note: Only number, letter, _, and – supported.

Write community

Read/write access to all SNMP targets, default is private.

Note: Only number, letter, _, and – supported.

Trap address

The destination address of the Trap information from the proxy program of the device.


Trap

SNMP trap is a proxy message sent to admin as important event notice or status change.

Trap Address

Address where to send Trap message.

Trap Port

Port which send Trap message, default is 162, range 1~65535.

Retrieved from "https://DahuaWiki.com/index.php?title=IPCSNMP&oldid=856"