Difference between revisions of "NVR/Recording Setup/RAID Hotspare"
m (JP moved page RAIDHotspare to NVR/Recording Setup/RAID Hotspare) |
|
(No difference)
|
Revision as of 22:46, 23 March 2016
How to setup Hotspare
Pre-Requisites
- An NVR that supports RAID and Hotspare
- 3 or more hard drives installed on your NVR, including a drive that is not currently part of the RAID array.
- Completed the instructions to setup RAID Link Here
Step by Step Instructions to Setup Hotspare
1. Login to your NVR from the web interface.
Error creating thumbnail: Unable to save thumbnail to destination
2. Go to Setup->Storage->Advance
Error creating thumbnail: Unable to save thumbnail to destination
3. Select the drive you wish to assign as the Hotspare, and set that drive to "HDD Group 2"
Error creating thumbnail: Unable to save thumbnail to destination
4. Click, "OK"
Error creating thumbnail: Unable to save thumbnail to destination
5. Go to Setup->Storage->RAID->Hotspare
Error creating thumbnail: Unable to save thumbnail to destination
6. Click on the Error creating thumbnail: Unable to save thumbnail to destination
(pencil) icon.
Error creating thumbnail: Unable to save thumbnail to destination
7. Choose the RAID array you wish to assign the Hotspare drive to, and click, "OK"
Error creating thumbnail: Unable to save thumbnail to destination
8. Click, "OK" again on the confirmation dialogue.
Error creating thumbnail: Unable to save thumbnail to destination
9. Once complete, the drive should be listed under, "Type" as either, "Local Hotspare" or "Remote Hotspare"
Error creating thumbnail: Unable to save thumbnail to destination