Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.
Difference between revisions of "Alarm Center"
(→Alarm Center) |
(→Alarm Center) |
||
| Line 1: | Line 1: | ||
==Alarm Center== | ==Alarm Center== | ||
| − | Step 1. from Main Menu Select the Network tab | + | '''Please Note:''' This interface is reserved for you to develop. System can upload alarm signal to the alarm center when local alarm occurs. Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send out data as the protocol defined, so the client-end can get the data. |
| + | |||
| + | Step 1. from Main Menu Select the Network tab | ||
| + | |||
| + | Step 2. Select Alarm Center > Enable | ||
| − | |||
| − | |||
[[File:alarm_center_wiki.png|500px]] | [[File:alarm_center_wiki.png|500px]] | ||
Revision as of 20:40, 18 April 2016
Alarm Center
Please Note: This interface is reserved for you to develop. System can upload alarm signal to the alarm center when local alarm occurs. Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send out data as the protocol defined, so the client-end can get the data.
Step 1. from Main Menu Select the Network tab
Step 2. Select Alarm Center > Enable
